Everbuild Cemstrip Surface Concentrated Cement Remover - Green - 1L
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Everbuild Cemstrip Surface Concentrated Cement Remover is designed for builders, renovators, and DIY enthusiasts seeking an effective and safer alternative to traditional acid-based cleaners. Its key benefit is its ability to remove stubborn cement, concrete, mortar stains, salts, efflorescence, and ingrained dirt from mineral surfaces and even metal equipment, without the harshness of hydrochloric acid. A potential caveat is its concentrated nature, requiring dilution for some applications, and always necessitating proper safety precautions.
All features
| Colour | Green |
|---|---|
| Model Part Number | CEMSPRAY1 |
| Brand | Everbuild |
Extended Product Information
FAQs
Is Everbuild Cemstrip safe for all types of stone?
While effective on many mineral substrates, it's always best to test Cemstrip on a small, inconspicuous area first, especially on natural stones that can be porous or sensitive. Avoid using on polished or highly decorative stone without testing.
How do I dilute the concentrated version?
The dilution ratio depends on the task. For general cleaning of paths and patios, a common ratio is 1 part Cemstrip to 5 parts water. For heavy-duty cement removal, a stronger concentration might be needed. Always consult the product label for detailed guidance.
Can I use this on my car or painted garden furniture?
No, Cemstrip is not designed for use on automotive finishes or painted surfaces, as it can damage the paintwork. It is intended for mineral substrates and bare metal.
How long should I leave the product on the surface?
Contact time varies. For general cleaning, 5-10 minutes may suffice. For stubborn stains, allow it to dwell for up to 30 minutes, but do not let it dry on the surface. Always keep the surface wet with the solution during the cleaning process. Rinse thoroughly afterward.
What safety precautions should I take?
Always wear appropriate personal protective equipment, including chemical-resistant gloves and eye protection. Ensure good ventilation when working indoors or in confined spaces. Avoid inhaling the spray or vapors.
Can I use Cemstrip in cold weather?
It is best to use Cemstrip in temperatures above 5°C. Avoid using it when frost is expected, as freezing can affect the product's performance and potentially damage treated surfaces.
Troubleshooting
Stains are not completely removed after first application.
For stubborn or old stains, a second application may be necessary. Ensure the product is given adequate contact time to work. Consider using a slightly stronger dilution if appropriate for the surface.
White residue appears after cleaning.
This could be efflorescence from the substrate reacting with moisture. Ensure the surface is thoroughly rinsed with clean water after cleaning and allowed to dry completely. Further applications of Cemstrip can help remove existing efflorescence.
Product appears to be etching or damaging the surface.
You may be using too strong a concentration or leaving the product on for too long. Always test on a small, hidden area first. Dilute further or reduce contact time. Rinse thoroughly immediately after treatment.
Pros and Cons
Pros
- More environmentally friendly than hydrochloric acid-based removers.
- Effective on a range of stubborn stains including cement, concrete, and efflorescence.
- Safe for use on most metal surfaces, protecting valuable equipment.
- Available in ready-to-use and concentrated formats for flexibility.
- Can be used as a general-purpose cleaner for ingrained dirt on patios and paths.
Cons
- Requires careful handling and appropriate personal protective equipment.
- Concentrated version requires dilution, adding an extra step for some users.
- May not be suitable for all delicate or colored surfaces; testing in an inconspicuous area is recommended.
- Effectiveness can vary depending on the age and severity of the staining.
Setup, Compatibility & Care Instructions
Setup:
Everbuild Cemstrip is available in a ready-to-use 1-litre spray can and a 5-litre concentrate bottle. The spray can requires no setup other than shaking before use and applying. For the concentrate, dilute with water according to the type and severity of the stain. A general guideline is 1 part Cemstrip to 5 parts water for moderate staining, but always refer to the product label for specific instructions.
Compatibility:
Cemstrip is designed for use on mineral substrates like concrete, brick, and stone. It is also safe for use on most metal surfaces. However, it is *not* recommended for use on painted surfaces, aluminum, or other sensitive materials without prior testing in an inconspicuous area. Always wear appropriate personal protective equipment (PPE), including gloves and eye protection.
Care:
Store Cemstrip in a cool, dry place, away from direct sunlight and incompatible materials. Ensure the container is tightly sealed when not in use. Clean up any spills immediately using absorbent materials. After use, rinse all treated surfaces thoroughly with clean water to remove any residue.