Shopping.co.uk

FloPlast Waste Pipe Coupler - 40mm

FloPlast Waste Pipe Coupler - 40mm

This white Polypropylene universal waste straight coupling from FloPlast is ideal for carrying was...

Best current price£2.97from B&Q

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceTrending
B&Q£2.97Visit shop

B&Q - 219412 Universal White Compression Non-Adjustable Straight Waste Pipe Coupler (Dia)40mm

Visit shop

All Offers

10 offers from £2.97 - £12.00

View price history by clicking the chart icon.

B&QB&Q - 219412 Universal White Compression Non-Adjustable Straight Waste Pipe Coupler (Dia)40mm
Free delivery in 1–3 days
£2.97
Visit shop
Professional Building SuppliesFloplast Multi Fit Compression Waste Coupling - 40Mm
Free delivery in 1–3 days
£6.85
Visit shop
eBayFloPlast Compression Waste Coupling 40mm White
Free delivery in 1–3 days
£6.86
Visit shop
OnBuy.comFloplast White Compression Waste Coupling - 40Mm 5055149901898
Free delivery in 1–3 days
£8.21
Visit shop
AmazonFLOPLAST 40mm Compression Waste Coupling - White
Free delivery in 1–3 days
£8.36
Visit shop

Product Information

Full details

This guide is for homeowners and plumbers looking to understand and effectively use the FloPlast 40mm Waste Pipe Coupler. The primary benefit of this coupler is its ability to create secure, watertight joints for waste pipes, ensuring efficient waste removal. A key consideration is proper installation, as incorrect assembly can lead to leaks. This article provides comprehensive information on installation, troubleshooting, and best practices.

All features

Model Part Number219412
BrandFloPlast

Extended Product Information

FAQs

What tools do I need for installation?

You'll need a pipe cutter, the FloPlast coupler, and potentially a screwdriver or wrench for tightening.

Can I reuse the coupler after disassembling it?

Yes, but inspect the rubber seal for damage. Replace the seal if it appears worn or damaged to ensure a watertight seal.

What pipe materials is this coupler compatible with?

It is compatible with both plastic and copper pipes.

What size options are available?

This coupler is available in 32mm and 40mm sizes.

Where is this coupler manufactured?

This coupler is manufactured in the UK.

What standards does this product meet?

It is manufactured to BS EN 1451 standards.

Can this coupler be used for high-pressure applications?

No, this coupler is not designed for high-pressure systems. It is intended for waste water applications.

Troubleshooting

The joint is leaking.

Check if the nut is tightened correctly. Ensure the rubber seal is correctly positioned and not damaged. If necessary, disassemble the joint, inspect the components, and reassemble.

The pipe won't fit into the fitting.

Ensure the pipe end is cut squarely and free of burrs. Make sure there are no obstructions inside the fitting. Check the pipe's outer diameter to ensure it matches the coupler's size (40mm).

Pros and Cons

Pros

  • Easy to install with readily available tools.
  • Provides a secure and watertight seal, preventing leaks.
  • Compatible with a wide range of pipe materials and sizes.
  • Durable construction ensures long-term performance.
  • Complies with industry standards for quality assurance.
  • Allows for easy disassembly if maintenance is required.

Cons

  • Requires careful alignment during installation to ensure a proper seal.
  • The compression fitting design can be more sensitive to overtightening.
  • May require replacing the rubber seal if damaged during disassembly.
  • Not suitable for high-pressure applications.
  • Requires cutting pipes square for optimal jointing.

Setup, Compatibility & Care

  1. Preparation: Ensure you have the coupler, pipe cutter, and any necessary tools.
  2. Pipe Preparation: Cut the pipes squarely and remove any burrs.
  3. Assembly: Unscrew the nut from the fitting, removing the washer and rubber seal. Place these over the pipe end, in the correct order: nut, washer, then seal (dished side away from the nut).
  4. Insertion: Push the pipe into the fitting as far as it will go. Slide the seal and washer forward into position.
  5. Tightening: Tighten the nut until a watertight seal is achieved. Avoid over-tightening.

Compatibility: This coupler is compatible with 40mm waste pipes made of plastic and copper. It is not designed for use with high-pressure systems.

Care: Regularly inspect the joint for leaks. If disassembly is needed, check the rubber seal for damage and replace it if necessary.

Similar items

FloPlast White Coupler - 32mmFrom £3FloPlast Compression Reducer - 40mm x 32mmFrom £4FloPlast Universal Adjustable Waste Pipe Bend - 135° - 40mmFrom £4McAlpine Overflow Straight Connector - 19/23mm - R1MFrom £6Hep2O Socket / Socket Reducer - 22 x 15mm - White PlasticFrom £12JG Speedfit Elbow Connector - 15mm - White PlasticFrom £3Flomasta Push-Fit 90° Pipe Elbow (Dia)122mm - FlomastaFrom £2JG Speedfit Push-Fit 90° Pipe Elbow - 10mmFrom £4JG Speedfit Equal Straight Coupler - 22mm - White - Pack of 5From £6Hep2O Socket / Socket Reducer - 22 x 10mmFrom £13Flomasta Push-Fit Shut-Off Valve - 15mmFrom £6JG Speedfit Reducing Straight Coupler - 15 x 10mm - WhiteFrom £14

Price History

DatePrice
Visit shop