4-in-1 Chip Burner Probe - Unbranded
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This 4-in-1 chip burner probe is for electronics hobbyists and professionals working with SOP8 and WSONVSON chips. Its key benefit is its versatility, allowing access to multiple chip sizes with interchangeable heads. A caveat is that successful chip burning depends on the programmer and chip circuitry, not solely on the probe.
All features
| Model Part Number | DOESNOTAPPLY |
|---|---|
| Brand | Unbranded |
Extended Product Information
FAQs
What chip sizes does this probe support?
It supports WSON8 8x6mm, WSON8 5x6mm, SOP8-4.2mm, and SOP8-5.5mm chip packages.
Does this product include a chip programmer?
No, this product is a chip burner probe cable and does not include the programmer. The programmer must be purchased separately.
How do I switch between probe heads?
The probe heads are designed to be interchangeable. Gently detach the current head and attach the desired one, ensuring a secure fit.
What causes a low success rate when burning chips?
The success rate depends on the programmer's support for the chip and the influence of the chip's peripheral circuit, not solely on the burning tool.
How should I clean the probe heads?
Use a dry, lint-free cloth to gently clean the probe heads. Avoid using liquids or abrasive materials.
Can I use this with any programmer?
The probe connects to standard programmers. However, the programmer must support the specific chip you are trying to read or write.
What is the difference between the SOP8 and WSON8 probe heads?
The SOP8 probe uses a nine-claw head, while the WSON8 probe uses a double needle tip, designed for the different physical layouts of these chip packages.
Troubleshooting
No connection to chip
Verify that the correct probe head for the chip's size is attached. Ensure the probe pins are aligned with the chip's pins and that the cable is securely connected to the programmer.
Intermittent connection
Check for any debris on the chip pins or the probe head. Gently clean both. Ensure the probe head is firmly seated on the cable and the cable is securely plugged into the programmer.
Programmer not recognizing chip
Confirm that your programmer supports the specific chip model. Ensure the probe is making solid contact with all necessary chip pins. Review the programmer's manual for connection requirements.
Probe head feels loose
Gently try to reseat the probe head onto the main cable connector. If it remains loose, inspect the connector for any damage.
Pros and Cons
Pros
- Offers great flexibility with four different chip size options in one tool.
- Interchangeable heads make it adaptable to a wide range of common chip packages.
- Robust construction suggests good durability for frequent use.
- Designed for direct connection to programmers, simplifying the burning process.
Cons
- Requires users to confirm their chip's pin spacing before purchase.
- Success rate of chip burning is influenced by external factors like the programmer and chip circuit.
- Does not include the programmer, which is a separate required component.
- Visual identification of which specific WSON or SOP package each head is for could be clearer.
Setup, Compatibility & Care
Setup: To set up the chip burner probe, identify the chip package you intend to work with (SOP8 or WSON8, and its specific dimensions). Select the corresponding probe head and attach it securely to the probe cable. Connect the other end of the cable to your compatible chip programmer. Ensure the probe pins align correctly with the target chip's pins.
Compatibility: This burner probe is designed to interface with standard chip programmers that support the necessary communication protocols for SOP8 and WSONVSON chips. The tool itself only facilitates the physical connection; compatibility with specific chips relies on your programmer's capabilities and the chip's peripheral circuitry.
Care: Keep the probe heads clean and free from dust or debris. Store the probe in a dry environment. If the probe heads become dirty, gently clean them with a dry, lint-free cloth. Avoid using liquids or abrasive cleaners. Handle the probe cable and heads with care to prevent damage to the delicate connection pins.