Trojan 3D Composite Door Hinge - White
Best current price£15.99from Amazon
Best offers
Shopping.co.uk recommended and popular offers
Amazon£15.99Visit shop Composite Doors Hinge White Trojan 3D Adjustable Butt Rebate Door Hinge
Visit shopAmazon£15.99Visit shop One Offer
1 offer from £15.99
View price history by clicking the chart icon.
AmazonComposite Doors Hinge White Trojan 3D Adjustable Butt Rebate Door Hinge
Free delivery in 1–3 days
£15.99
Visit shop
Product Information
Full details
This guide is for installers and homeowners looking to achieve a perfect fit on composite doors. The Trojan 3D Composite Door Hinge in White offers unparalleled adjustment capabilities, ensuring a seamless finish. A potential caveat is that precise adjustment may require some practice for users unfamiliar with 3D hinge systems. Key features include its pre-assembled design, full 3D adjustability (lateral, vertical, and compression), and easy sash removal for installation.
All features
| Colour | White |
|---|---|
| Model Part Number | TROJAN3DCOMPOSITEDOORHINGE |
| Brand | PERFORMANCE |
Extended Product Information
FAQs
Can this hinge be used on any type of door?
No, the Trojan 3D Composite Door Hinge is specifically designed for use with composite doors only. It is not compatible with UPVC or timber doors.
What does '3D adjustment' mean?
3D adjustment refers to the hinge's ability to be adjusted in three directions: laterally (side-to-side), vertically (up-and-down), and in compression (how tightly the door seals against the frame gasket).
How much adjustment is available?
The hinge offers lateral adjustment of +/- 3mm, vertical adjustment of +/- 4mm, and compression adjustment of +/- 1.75mm.
Is the sash easy to remove?
Yes, the design allows for the easy removal of the door sash from the frame, which greatly simplifies the installation process.
How do I adjust the hinge?
Adjustment is made via dedicated screws on the hinge body. Use the appropriate tools to turn the screws for lateral, vertical, or compression adjustments as needed.
What is the benefit of the white finish?
The white finish provides a clean and neutral aesthetic that complements most composite door colors and designs.
Do I need any special tools for installation?
Basic tools such as screwdrivers (Phillips and/or Pozidriv, depending on the screw type) are typically required. Specific tools may be recommended for fine-tuning adjustments, consult installation guides.
Troubleshooting
Door is stiff to open or close
Check the compression and lateral adjustment settings. Ensure they are not set too tightly, which could bind the door. Slightly loosen the relevant adjustment screws.
Drafts are noticeable around the door
Increase the compression adjustment slightly to ensure the gasket is fully engaged. Verify that the lateral adjustment is also correctly set to align the door with the frame.
Hinge squeaks
Lubricate the hinge pin with a silicone-based lubricant. Avoid oil-based lubricants which can attract dirt.
Adjustment screws feel loose or stripped
Ensure the correct screwdriver bit is used. If damage has occurred, replacement of the hinge may be necessary.
Pros and Cons
Pros
- Offers precise 3D adjustment for a perfect door seal and alignment.
- Pre-assembled for quick and straightforward installation.
- Sash removal feature simplifies fitting and allows for easier maintenance.
- Durable construction suitable for composite doors.
- Clean white aesthetic fits well with most door designs.
Cons
- Adjustment mechanisms may require a learning curve for some users.
- Specific tools may be needed for fine-tuning adjustments.
- Not designed for UPVC or timber doors.
- Higher initial cost compared to basic hinges.
Setup, Compatibility & Care
Setup:
- Ensure the door and frame are prepared according to the manufacturer's specifications.
- Align the hinge components on the door and frame.
- With the sash removed, attach the frame parts of the hinge.
- Re-attach the sash to the frame hinge parts.
- Use the adjustment screws for lateral, vertical, and compression settings to achieve the desired door fit. Refer to the adjustment ranges: Lateral +/- 3mm, Vertical +/- 4mm, Compression +/- 1.75mm.
Compatibility:
- Exclusively designed for use with composite doors.
- Not suitable for UPVC or timber doors.
Care:
- Clean with a soft, damp cloth. Avoid abrasive cleaners that could damage the white finish.
- Periodically check the adjustment screws to ensure they remain secure.