Draper Heat Gun - 1800W

The working temperature range for this heat gun is between 400°C and 600°C.

The airflow rate is adjustable between 250 and 500 liters per minute (l/min).

This product is intended for domestic and infrequent light trade use. It may not be robust enough for continuous, heavy-duty professional applications.

While a heat gun can soften paint, extreme caution and appropriate safety measures (like respirators) are necessary when dealing with potentially lead-based paints. Consult safety guidelines specific to lead paint removal.

Always unplug the unit and let it cool down completely. Wipe the exterior with a soft, damp cloth. Ensure ventilation slots remain clear of dust and debris.

It is ideal for tasks such as paint stripping, thawing frozen pipes, softening adhesives, and other general DIY applications.

The product description does not specify included nozzles. It is designed to work with standard heat gun accessories, but compatibility should be verified if purchasing separate attachments.

Ensure the power cord is securely plugged into a working 230V outlet. Check the power switch is in the 'on' position. If the issue persists, contact customer support.

Verify the temperature setting is correctly adjusted. Check that the ventilation slots are clear of dust and debris, as blockages can impede performance. Ensure the airflow setting is not set too low for the task.

Turn off the unit and unplug it. Inspect the ventilation areas for any foreign objects. If the noise continues after clearing any obstructions, it may indicate an internal issue, and professional inspection might be required.

The unit may have an internal thermal cut-out. Ensure the ventilation slots are clear and the unit is not being used in an environment where airflow is restricted. Allow the unit to cool down completely before attempting to use it again.