JML Paint Sprayer Elite

The JML Paint Sprayer Elite is compatible with a wide range of paints, including solvent-based and water-based paints, primers, varnishes, automotive topcoats, stains, and wood preservatives.

After each use, disassemble the sprayer and clean each part with the appropriate solvent or water, depending on the paint used. Pay special attention to the nozzle.

The 800ml paint container allows you to cover approximately seven square meters.

Carefully remove the nozzle and clean it with the appropriate solvent or water. You may need to use a fine brush or needle to remove stubborn clogs.

The sprayer typically has an adjustment mechanism on the nozzle that allows you to change the spray pattern (horizontal, vertical, or circular) to suit your needs.

Yes, the JML Paint Sprayer Elite is suitable for both indoor and outdoor use.

Warranty information is not available in the product data.

Check if the paint container is properly attached. Ensure the nozzle is not clogged. Clean or replace the nozzle.

Thin the paint if necessary. Ensure the nozzle is clean and correctly assembled. Adjust the spray pattern and air pressure.

Maintain a consistent distance and speed while spraying. Overlap each pass slightly. Ensure the surface is properly prepared.

Check all connections and tighten if necessary. Inspect the seals for damage and replace if needed.