Best current price£33.47from City Plumbing GB
Shopping.co.uk recommended and popular offers
City Plumbing GB£33.47Visit shop Plumbright Polybutylene 15Mm X 25M Barrier Pipe 3096200988
Visit shop
B&Q£35.00Visit shop B&Q - Polybutylene 15mm X 25M Barrier Pipe 3096200988
Visit shop2 offers from £33.47 - £35.00
View price history by clicking the chart icon.
The Plumbright Polybutylene Barrier Pipe (15mm x 25m) is designed for professional plumbers and DIY enthusiasts working on domestic potable water and central heating systems, including underfloor heating. Its primary benefit is the integrated oxygen barrier, which significantly reduces system corrosion; however, users must ensure they utilize appropriate fittings compatible with BS7291 standards to maintain the integrity of the pressurized system.
| Model Part Number | 3096200988 |
|---|---|
| Brand | Plumbright |
Yes, it is WRAS approved and safe for use in potable water distribution systems.
Yes, when using pushfit or compression fittings, a stainless steel or plastic pipe insert (support sleeve) must be used to maintain structural integrity.
It is compatible with standard BS864 compression fittings, provided the correct pipe insert is utilized inside the tube.
The pipe is rated for 7 bar pressure at a temperature of 82C.
This pipe is intended for domestic indoor use; it should be protected from direct UV exposure and freezing conditions.
Ensure the pipe end is cut square and is free from burrs. Check that the pipe is fully inserted into the fitting.
Warm the pipe slightly in a room-temperature environment before uncoiling to make it more pliable for installation.
Verify that your chosen fitting is rated for use with BS7291 plastic pipe to ensure the correct internal support sleeve is used.
To ensure a leak-free installation, the pipe must be cut cleanly using a proper pipe cutter to prevent jagged edges that could damage O-ring seals. It is fully compatible with standard BS864 compression fittings and BS7291-approved pushfit systems. When connecting to pushfit fittings, ensure the pipe is inserted fully past the grab ring and O-ring. Keep the coil stored in a cool, dry place away from direct sunlight when not in use. Avoid using aggressive chemical cleaners or petroleum-based lubricants on the pipe, as these can degrade the material over time.
