Arthouse Under The Sea Wallpaper - Blue

This wallpaper requires a paste-the-wall adhesive. Follow the adhesive manufacturer's instructions for application.

Measure the height and width of the wall. Subtract any windows and doors, then calculate the total wall area. Take into account the pattern repeat and width of the roll. It is always a good idea to buy an extra roll.

While the wallpaper is suitable for most rooms, it's best to avoid areas with excessive moisture or direct water contact. Ensure good ventilation.

The removal method depends on the type of adhesive used and the wall surface. Generally, it's recommended to score the surface first with a scoring tool, and then apply wallpaper remover solution. Follow the remover's instructions.

The pattern repeat is 53cm.

The offset pattern match is 26.5cm.

Yes, you can gently clean the wallpaper with a damp cloth.

Ensure the wall is properly prepared (clean, dry, and smooth). Apply sufficient adhesive to the wall and allow a few minutes for it to become tacky before applying the wallpaper. Press firmly and smooth out any air bubbles.

Carefully align the edges of each strip, matching the pattern according to the 26.5cm offset. Use a seam roller to smooth the seams and ensure they are well adhered. Check the pattern match before pasting to ensure it aligns correctly.

Handle the wallpaper with care and avoid excessive stretching or pulling. Use a sharp craft knife to trim excess paper around edges. Ensure the application surface is free from any sharp objects.