MDPE Pipe - 25mm x 25m - Blue
Best current price£29.00from Professional Building Supplies
Best offers
Shopping.co.uk recommended and popular offers
Professional Building Supplies£29.00Visit shop Pipelife Blue Mdpe Pipe - 25Mm X 25Mtr
Visit shopProfessional Building Supplies£29.00Visit shop One Offer
1 offer from £29.00
View price history by clicking the chart icon.
Professional Building SuppliesPipelife Blue Mdpe Pipe - 25Mm X 25Mtr
Free delivery in 1–3 days
£29.00
Visit shop
Product Information
Full details
The FloPlast MDPE Blue Pipe is an essential component for plumbers, contractors, and DIY enthusiasts tasked with installing reliable potable water supply lines in residential or commercial settings. Its primary benefit is its high durability and 16-bar pressure rating, ensuring a long-lasting, leak-resistant connection for underground water service; however, users should note that as a flexible polyethylene product, it requires specific compression fittings to ensure a watertight seal.
All features
| Model Part Number | 1270644 |
|---|---|
| Brand | FloPlast |
Extended Product Information
FAQs
Is this pipe suitable for hot water?
No, this MDPE pipe is specifically designed for cold potable water systems.
What is the outside diameter of this pipe?
The pipe has an external diameter of 25mm.
Do I need special tools to connect this pipe?
You will need a pipe cutter and standard 25mm compression fittings.
Is the pipe safe for drinking water?
Yes, it is kitemarked to BS EN 12201, meeting the requirements for drinking water supply.
Can this pipe be used above ground?
While it can be used above ground, it should ideally be protected from direct, prolonged UV exposure to prevent material degradation.
Troubleshooting
Leak at the compression fitting
Ensure a stiffener/insert is placed inside the pipe end and that the fitting nut is tightened securely.
Pipe is too stiff to uncoil for installation
Allow the coil to sit in a warm area for several hours or keep it near a heat source to improve flexibility before laying it out.
Pros and Cons
Pros
- Kitemarked to rigorous BS EN 12201 standards
- Excellent resistance to pressure and underground stressors
- Lightweight and relatively easy to cut for quick installation
- Corrosion-resistant material ensures long service life
Cons
- Requires professional-grade compression fittings for secure seals
- Can be difficult to uncoil in cold weather due to material stiffness
- Not suitable for hot water supply lines
Setup, Compatibility & Care
To install this 25mm pipe, ensure you have a dedicated pipe cutter to achieve a square, burr-free end. Always use compatible 25mm MDPE compression fittings designed for polyethylene piping.
- Cut the pipe cleanly using a pipe cutter.
- Ensure the end of the pipe is chamfered slightly if required by the specific fitting manufacturer.
- Insert a stiffener (pipe insert) into the end of the pipe to prevent deformation when the compression nut is tightened.
- Slide the nut and compression ring onto the pipe before pushing it firmly into the fitting.
- Tighten the nut by hand, followed by a final tightening with a wrench to ensure a watertight seal.
For care, avoid prolonged exposure to direct sunlight above ground, as UV radiation can degrade polyethylene over extended periods.