Knipex Side Cutters - 125mm

These snips are designed for cutting soft wire up to 1.6mm and hard wire up to 1mm, as well as plastics and other similar materials.

The cutting edges are hardened to approximately 54 HRC.

No, these snips are designed for fine cutting work in electronics and fine mechanics and are not suitable for heavy-duty tasks.

Store them in a dry place to prevent rust and protect the cutting edges.

They are suitable for cutting hard wire up to 1mm, but not designed for cutting heavy steel or other hard materials beyond the specified capacity.

Occasionally lubricate the joint with a light machine oil.

The opening spring makes the tool easier and more comfortable to use, especially during repetitive tasks.

The opening limiter helps prevent over-extension of the handles, which can improve control and prevent damage to the tool.

Check for damage to the cutting edges. Ensure you are not exceeding the tool's cutting capacity. Clean the blades to remove any residue.

Apply a small amount of light machine oil to the joint and work the snips open and closed several times.

Make sure you are not exceeding the tools cutting capacity. Check if the cutting edges are damaged. Replace the tool if necessary.