Trend Guide Brush - 30mm

The primary function is to guide the router accurately when using jigs or templates, ensuring precise cuts and shapes.

It is compatible with most Trend routers (excluding the T7), but it can be used with other routers with the Trend UNIBASE.

Attach the guide bush to the router base using the provided screws. Ensure it is securely fastened and centered.

The 6mm spigot projection is ideal for use with user-made templates, allowing for versatility in template design.

Clean the guide bush of sawdust and debris after each use. Store it in a dry environment and replace if it is worn.

MDF or other suitable materials are recommended for templates due to their stability and ease of use.

No, this guide bush is designed specifically for use with templates and jigs.

Check if the guide bush is securely fastened. Verify that the template edges are clean and free of debris. Ensure the router bit is correctly aligned and the template is securely clamped.

Tighten the screws that attach the guide bush to the router base. Make sure the screws are the correct size and type.

Ensure the guide bush is in good condition, replace if worn or damaged. Check for any sharp edges or burrs on the template and smooth them out.

Adjust the router bit height to prevent it from contacting the template. Ensure the guide bush extends far enough below the router bit.