Best current price£9.19from The Range
Shopping.co.uk recommended and popular offers
The Range£9.19Visit shop Unifix Grade 4.8 Allthreads Din 976-1-A Bright Zinc Plated - M12 X 80 (Box Of 10) - Silver
Visit shopThe Range£11.49Visit shop Unifix Grade 4.8 Allthreads Din 976-1-A Bright Zinc Plated - M8 X 80 (Box Of 25) - Silver
Visit shop50 offers from £9.19 - £13.16
View price history by clicking the chart icon.
The Unifix Grade 4.8 Allthread stud is designed for construction professionals, automotive technicians, and DIY enthusiasts who require a reliable and versatile fastening solution for diverse structural projects. Engineered to DIN 976-1-A standards, these studs provide excellent mechanical strength and consistent performance, though they are best suited for indoor or sheltered environments due to their bright zinc plating.
| Colour | Silver |
|---|---|
| Model Part Number | DIN 976-1-A |
| Brand | Unifix |
Grade 4.8 refers to the mechanical properties of the steel, specifically its tensile strength and yield point, making it suitable for standard structural assembly tasks.
They are bright zinc plated, which offers some corrosion resistance, but they are primarily intended for internal or protected environments.
Measure the outer diameter of the threads; this corresponds to the metric sizing (e.g., M8, M10).
Yes, they are manufactured as allthread (threaded rod) to DIN 976-1-A standards, meaning the threading runs the entire length of the rod.
A standard metal-cutting hacksaw or an angle grinder equipped with a metal cutting disc will suffice.
Use a file to remove metal burrs from the cut edge or use a die nut to re-thread the leading edge.
The bright zinc plating has likely been compromised; clean the surface with a wire brush and apply a cold-galvanizing spray or clear coat to prevent further oxidation.
For installation, ensure you are using the correct metric nut and washer size compatible with the stud's diameter (e.g., M5, M8, M10, or M12). When cutting the stud, use a metal-cutting hacksaw or angle grinder; it is recommended to thread a nut onto the stud before cutting, then remove the nut afterward to help clean up any burrs on the threads for smoother installation. To maintain the bright zinc plating, keep the studs in a dry storage environment. If used in a workshop setting, a light application of machine oil can prevent surface oxidation over long periods.
