Battery Converter Adapter - Einhell - EIN18PAR - Power X-Change

This adapter is designed specifically for Einhell 18V Power X-Change (PXC) batteries. Ensure your battery is part of the PXC system.

The adapter is designed for Parkside X Team Series tools. It may not be compatible with other Parkside tool lines or models that have different battery housing designs.

When properly connected, the adapter should allow the tool to function at its intended power level, similar to using a native battery. Performance can be impacted by a loose connection or a battery with a low charge.

Use a dry, soft cloth to wipe down the exterior and the electrical contacts. Avoid using liquids or abrasive cleaners, as these can damage the adapter.

Please refer to the retailer or manufacturer's documentation for specific warranty information, as this can vary.

This is an adapter designed to allow compatibility between Einhell Power X-Change batteries and Parkside X Team Series tools. It is not an official product of either brand but a third-party solution.

Ensure the Einhell battery is fully charged and properly seated in the adapter. Check that the adapter is securely clicked into the tool. Remove and re-insert both the battery and the adapter to confirm a solid connection.

This usually indicates a poor connection. Remove the battery and adapter, clean the contacts on both, and re-insert them, ensuring a firm click at each stage. Check the battery's charge level.

Verify that the tool is indeed a Parkside X Team Series model compatible with this adapter type. Ensure no debris is obstructing the tool's battery port or the adapter's connection pins.