The Thistle Finishing Plaster (7.5kg Bag) is a premium plaster designed to create a smooth, high-q...The Thistle Finishing Plaster (7.5kg Bag) is a premium plaster designed to create a smooth, high-quality finish on interior walls and ceilings. Ideal for use as a final coat on new plaster or rough surfaces, it ensures excellent workability and durability. Perfect for plastering projects, the Thistle Finishing Plaster delivers flawless results, ready for painting or decorating. This bag is designed for smaller DIY jobs, whether it's a bathroom wall or bedroom ceiling. Once mixed, it's suitable for application over plaster or straight onto all kinds of plasterboard including low to medium-high suction gypsum and cement-based undercoats. The contents cover an area of up to 3 m². There's no need for extra ad-mixtures, as this all-in-one bag contains everything to create gypsum plaster. You simply add water and mix using a manual or electronic paddle. For convenience, this finishing plaster can safely be applied in frosty conditions, as long as the background isn't frozen. The mix dries to a smooth finish, so it's ideal for use as a base for decorative finishes. It is ideal for smaller repairs and DIY jobs, easy to use over plaster or plasterboard, dries to a smooth finish for decoration, covers 3m², is fire-resistant, and complies with EN 13279-1 Type B1/20/2.
This guide provides essential information for using the Thistle Finishing Plaster (7.5kg Bag), a premium plaster designed for achieving smooth, high-quality finishes on interior walls and ceilings. It's ideal for both DIY enthusiasts and professionals seeking flawless results on plasterboard and pre-plastered surfaces. Note that while this plaster is versatile, proper surface preparation is crucial for optimal adhesion and finish.
All features
Colour
Pink
Model Part Number
5200814637
Brand
Thistle
Extended Product Information
FAQs
How much area does one bag cover?
One 7.5kg bag covers up to 3 m².
Can I use this plaster on exterior walls?
No, this plaster is designed for interior use only.
Do I need to prime the surface before applying?
It is recommended to prime the surface, especially if it's a porous material or has existing paint.
What tools do I need?
You will need a mixing bucket, a trowel, a mixing paddle (manual or electronic), and potentially sandpaper for finishing.
How long does it take for the plaster to dry?
Drying time depends on environmental conditions, but generally, it takes a few hours to dry to the touch. Full drying may take up to 24 hours.
Can I apply this plaster in cold weather?
Yes, it can be applied in frosty conditions, provided the background isn't frozen.
What is the shelf life of the plaster?
Store the plaster in a dry place. The shelf life is typically 6-12 months from the manufacturing date if stored correctly.
Troubleshooting
Plaster is cracking after drying.
Ensure the surface is properly prepared, and apply the plaster in thin layers. Avoid applying too much plaster at once.
Plaster is not adhering to the surface.
Make sure the surface is clean, dry, and primed if necessary. Ensure the plaster is mixed to the correct consistency.
The finish is not smooth.
Use a clean trowel and apply the plaster evenly. Sand the surface gently after drying to achieve a smooth finish.
Pros and Cons
Pros
Creates a smooth, paint-ready surface.
Easy to mix and apply, suitable for DIY use.
Works on various surfaces, including plasterboard and existing plaster.
Provides good coverage for small to medium-sized projects.
Offers fire-resistant properties.
Cons
Requires proper surface preparation for optimal adhesion.
Coverage area is limited to 3m² per bag.
Not suitable for large-scale projects without multiple bags.
Setup, Compatibility & Care
Preparation:
Ensure the surface is clean, dry, and free from loose debris.
For existing plaster, remove any loose paint or old plaster.
Prime the surface if necessary, following the primer manufacturer's instructions.
Mixing:
Add clean water to a mixing bucket.
Gradually add the plaster while mixing with a manual or electronic paddle.
Mix until a smooth, creamy consistency is achieved.
Allow the mix to stand for a few minutes before use.
Application:
Apply the plaster evenly using a trowel.
Work in thin layers, building up the finish as needed.
Allow each layer to dry before applying the next.
Smooth the surface using a trowel or sanding, as needed.
Compatibility:
Compatible with a wide range of plasterboards including low to medium-high suction gypsum and cement-based undercoats.