BPC Fixings Flat Connector Plate - Silver - 60x100mm

You will need wood screws or bolts appropriate for the timber you are using. For general timber, 5mm diameter screws of sufficient length to penetrate both the plate and the wood are recommended.

No, screws or other fasteners are not included with the BPC Fixings Flat Connector Plates. These must be purchased separately.

Yes, the plates are manufactured from galvanised steel, which provides rust resistance, making them suitable for many outdoor applications. However, prolonged exposure to severe weather may eventually affect the finish.

The plates are manufactured from 2.5mm thick galvanised steel for strength and durability.

Each pack contains 10 flat connector plates.

Yes, the plates can be painted. For best adhesion, clean the surface thoroughly and use a metal primer before applying your chosen paint.

The dimensions are 60mm in width and 100mm in length.

Ensure timber pieces are cut to the correct dimensions and positioned flush before applying the plate. Check for any debris preventing proper seating.

Verify that the correct type and length of screws are being used. Ensure screws are driven straight into the timber and not at an angle. Pre-drilling pilot holes in hardwood may be beneficial.

While designed to be rust-resistant, prolonged exposure to harsh conditions can eventually cause surface rust. Clean with a soft brush and water, then dry thoroughly. For severe rust, consider applying a suitable metal primer and paint.