Best current price£6.59from City Plumbing GB
Shopping.co.uk recommended and popular offers
City Plumbing GB£6.59Visit shop Plumbright Black Solvent Weld Waste Pipe 32Mm X 3M Pw3l32b
Visit shop1 offer from £6.59
View price history by clicking the chart icon.
This 3-meter length of 32mm black plastic solvent weld waste pipe is designed for plumbing professionals and DIY enthusiasts needing a reliable solution for directing waste water. Its key benefit is offering excellent value without compromising on material quality for standard plumbing applications. A caveat to consider is its specific use with solvent weld systems, requiring appropriate primers and cements for secure joints.
| Model Part Number | PW3L32B |
|---|---|
| Brand | Davant |
Solvent weld plumbing uses a chemical solvent (primer and cement) to fuse plastic pipes and fittings together, creating a permanent, watertight bond without mechanical seals.
Yes, for a secure and long-lasting joint, both a solvent primer (to soften and clean the plastic) and a solvent weld cement (to fuse the materials) are typically required.
This pipe is primarily designed for cold waste water applications. Prolonged exposure to high temperatures can affect the plastic integrity. Consult manufacturer specifications for specific temperature limits.
Solvent weld pipes are permanently fused with solvent cement, requiring specific tools and chemicals. Push-fit pipes use internal seals and grippers, allowing for quick, tool-free assembly and disassembly.
Drying and setting times vary by manufacturer and ambient temperature. Generally, joints should be held for about 30 seconds and allowed to cure for at least an hour before testing, but always follow the product's specific instructions.
While painting is possible, it is generally not recommended for exposed waste pipes. If painting, use a paint suitable for plastics and ensure it does not compromise the pipe's material properties or joint integrity.
Ensure surfaces were clean and dry before applying primer and cement. Verify that enough cement was used and the pipe was fully inserted and held until set. Re-cut and re-join if necessary, following manufacturer instructions precisely.
Use a sharp pipe cutter or a fine-toothed saw for a clean, square cut. If using a saw, ensure to deburr the end afterwards.
Check the expiry date of the solvent cement and primer; old products may lose efficacy. Ensure correct application procedure is followed, including adequate drying time before testing.
Setup: To install, cut the pipe to the required length using a pipe cutter or fine-toothed saw. Ensure the ends are clean and square. Apply solvent primer to both the outside of the pipe end and the inside of the fitting socket. Follow immediately with solvent weld cement, applying it to the same surfaces. Insert the pipe into the fitting with a slight twisting motion until it bottoms out, and hold firmly for approximately 30 seconds to prevent push-out. Allow the joint to cure as per the cement manufacturer's instructions before running water through the system.
Compatibility: This pipe is designed exclusively for solvent weld systems. It is compatible with other 32mm solvent weld fittings and pipes from reputable brands, provided they adhere to the same industry standards. It is *not* compatible with push-fit, compression, or solvent-free connection methods.
Care: This pipe requires minimal care once installed. Regularly check for any signs of leakage at joints. Avoid exposing the pipe to excessive heat or corrosive chemicals not typically found in domestic waste water, as this may degrade the plastic over time.
