AB Tools 330mm Brick Profile Sliding Mortar Joint Clamp - 1Pc
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This AB Tools 330mm sliding brick profile clamp is designed for bricklayers and DIY enthusiasts needing a reliable way to secure profiles in internal corners or temporarily join furniture pieces. Its key benefit is providing a stable, adjustable clamp that fits into mortar gaps, ensuring accurate alignment and secure holding. A potential caveat is that its effectiveness relies on the integrity of the brickwork or the material being clamped.
All features
| Model Part Number | 1 |
|---|---|
| Brand | AB Tools |
Extended Product Information
FAQs
What is the maximum clamping capacity of this tool?
The clamp has a maximum opening of 300mm, allowing it to secure profiles or materials up to this width.
Can this clamp be used for external corners in brickwork?
This clamp is specifically designed for internal corners where the jaw can fit into the mortar gap. It may not be as effective or practical for external corners.
What material is the clamp made from?
The clamp is manufactured from steel and is zinc-plated for maximum strength and durability.
How do I adjust the clamp?
You adjust the clamp by loosening or tightening the T-bolt thumb screw. Turning the screw applies pressure and locks the clamp in place at the desired width.
Is this clamp suitable for heavy-duty woodworking?
While it can be used for holding furniture together while glue sets, it is primarily designed for bricklaying profiles. For heavy-duty woodworking requiring significant clamping force, specialized woodworking clamps might be more appropriate.
What is the total length of the clamp bar?
The total length of the bar is 330mm.
How deep is the thread on the T-bar fastener?
The T-bar fastener has a total thread length of 60mm.
Troubleshooting
Clamp does not hold securely.
Ensure the T-bolt thumb screw is tightened sufficiently. Check that the material or brickwork is stable and the jaw is making good contact. Clean the jaw if it's obstructed by debris.
T-bolt is difficult to turn.
Clean the threads of the T-bolt and the corresponding mechanism. Apply a small amount of lubricating oil to the threads and work the screw back and forth.
Clamp does not reach the desired opening.
Verify the maximum opening is 300mm. Ensure the clamp is fully extended by loosening the T-bolt and sliding the adjustable part to its furthest point.
Rust or corrosion on the clamp.
Gently remove surface rust with a wire brush or fine-grit sandpaper. Clean the affected area and apply a thin layer of oil or protective coating to prevent further corrosion. Ensure the clamp is stored in a dry environment.
Pros and Cons
Pros
- Securely holds profiles in brickwork for accurate alignment.
- Durable steel and zinc-plated construction ensures longevity.
- Adjustable design accommodates a wide range of profile sizes.
- Easy to operate with a T-bolt thumb screw.
- Versatile for both bricklaying and light woodworking applications.
Cons
- Requires stable brickwork or material for effective clamping.
- May not be suitable for extremely heavy-duty furniture assembly.
- The slim jaw might not grip irregular surfaces as effectively.
Setup, Compatibility & Care
Setup:
- Identify the profile or material requiring clamping.
- Adjust the T-bolt thumb screw to open the clamp to the desired width, ensuring it can fit snugly.
- For brickwork, insert the slim profile jaw into the mortar gap between bricks. For other applications, place the jaws onto the materials to be joined.
- Tighten the T-bolt thumb screw firmly to apply secure pressure and hold the profile or material in place.
Compatibility:
- Compatible with standard brick profiles and construction materials.
- Suitable for joining wood or other rigid materials for applications like furniture assembly.
- Effective in mortar joints and on flat surfaces.
Care:
- After use, clean the clamp of any mortar or debris with a damp cloth. Avoid abrasive cleaners.
- Wipe dry to prevent rust, especially the steel components.
- Store in a dry place to maintain its condition and prevent corrosion. Occasional light oiling of the T-bolt threads can ensure smooth operation.