Everbuild 406 Stabilising Solution - 5 Litre - White

Everbuild 406 Stabilising Solution is suitable for use on plaster, rendering, pebble-dash, stucco, existing painted surfaces, brickwork, and blockwork.

It typically dries in 2-4 hours, depending on the environmental conditions.

No, it's ready to use. Do not dilute.

Yes, it is suitable for both interior and exterior use.

Apply evenly using a brush or roller.

Ensure the surface is properly cleaned before application. Consider a second coat if the surface remains excessively dusty after the first application.

Always wear appropriate protective equipment, such as gloves and eye protection. Ensure adequate ventilation during application and drying.

Ensure adequate ventilation. Check for excessive humidity or low temperatures, which can slow down drying. Ensure that the surface was properly prepared.

Make sure the stabilizing solution has fully dried before applying paint or wallpaper. Ensure compatibility of the finishing product with the stabilizer.

This could be due to over-application. Ensure you've applied a thin, even coat. If this persists, the surface may not be suitable for the product.