Reggio Vertical Triple Column Traditional Radiator - Grey
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Reggio Vertical Triple Column Traditional Radiator is an ideal heating solution for homeowners looking to blend classic aesthetics with efficient thermal output in living rooms or bedrooms. Featuring a durable steel construction and a sleek grey powder-coated finish, it offers a robust design that fits both period and contemporary interiors. While the unit provides excellent space-saving vertical orientation and reliable heating, users should note that radiator valves are not included in the package and must be purchased separately to complete the installation.
All features
| Colour | Grey |
|---|---|
| Brand | Reggio |
Extended Product Information
FAQs
Does this radiator come with valves?
No, valves are not included and must be purchased separately based on your specific piping needs.
Can I install this on a stud wall?
It is recommended to install on a solid wall or ensure your stud wall is properly reinforced to bear the weight of the steel radiator.
Is this radiator compatible with a combi boiler?
Yes, it is compatible with all standard central heating systems, including combi boilers.
What standards are met by this product?
The radiator is tested and certified to both CE and BS EN 442 standards.
How do I maintain the grey finish?
Regularly dust with a soft cloth and clean with a mild soap solution; avoid harsh abrasive chemicals.
Troubleshooting
Radiator is cold at the top
The radiator likely has trapped air; use a radiator key to bleed it until water flows steadily.
Radiator does not heat up at all
Check that the valves are fully opened and ensure the system is properly balanced by a professional.
Leaking at valve connections
Tighten the connections or apply fresh PTFE tape to the valve threads to ensure a watertight seal.
Pros and Cons
Pros
- Space-saving vertical orientation
- High heat output due to triple-column design
- Durable steel build with protective finish
- Compatible with all standard central heating systems
- Certified quality and safety standards
Cons
- Radiator valves not included
- Requires professional plumbing for installation
- Heavy unit requires secure wall mounting
Setup, Compatibility & Care
Installation of the Reggio radiator is straightforward for those with plumbing experience, as it is fully compatible with all standard domestic central heating systems. Each unit includes the necessary wall fixings and plugs, though you must ensure your wall type can support the weight of a steel radiator.
Installation Steps:
- Ensure the central heating system is drained if replacing an existing unit.
- Mark and drill holes according to the provided mounting instructions.
- Secure the wall fixings firmly to the wall.
- Attach the radiator and ensure it is level.
- Install your purchased radiator valves (required) and connect the flow and return pipes.
- Bleed the radiator once the system is refilled to remove trapped air.
Care Instructions: Keep the finish looking new by wiping the surface with a soft, damp cloth. Avoid harsh chemical cleaners or abrasive pads that may scratch the powder-coated surface.