Best current price£8.33from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£8.33Visit shop Forgefix Sleeve Anchors, Hex Bolt Type, Zyp
Visit shop
B&Q£8.70Visit shop - Forgefix Sleeve AnchorsHex Bolt TypeZyp Multi Colour (M12 X 60)
Visit shop3 offers from £8.33 - £8.70
View price history by clicking the chart icon.
The Forgefix Sleeve Anchor is an ideal solution for contractors and DIY enthusiasts who need a reliable, heavy-duty fixing for masonry, concrete, or brickwork. These anchors offer the primary benefit of high-expansion holding power even at shallow depths, making them perfect for installing handrails, racking, and machinery. A notable caveat to consider is that they are permanent fixtures and require precision drilling; once expanded, they are difficult to remove without damaging the base material.
| Colour | Yellow |
|---|---|
| Brand | Forgefix |
No, these anchors require a solid base material like concrete or dense brick to expand properly against the walls of the hole.
You will need a power drill with a masonry bit and either a spanner or a socket wrench that matches the hex head size.
Yes, the Zinc Yellow Passivation finish provides good corrosion resistance, but they should not be used in submerged or highly corrosive industrial environments.
No, once a sleeve anchor is expanded, the sleeve is permanently deformed and will not provide the same structural integrity if reused.
It means you can drill through the item you are attaching and into the wall simultaneously, placing the anchor through the fixture as you install it.
The hole was likely drilled too large. Use a smaller diameter drill bit or check if the masonry is too soft to support the expansion.
Ensure the hole is clear of dust and debris. Verify that the drill bit used is the correct metric size for the anchor's sleeve diameter.
To ensure maximum holding power, always use a masonry drill bit that exactly matches the recommended diameter for your specific anchor size.
