AGV K3 E2206 Helmet - Matt White/red Fluo

Use mild soap and water to clean the outer shell and visor. Use a damp cloth to clean the interior lining. Avoid using harsh chemicals or solvents.

The Pinlock® visor is an anti-fog insert that prevents the visor from fogging up, especially in cold and damp conditions. It is included with the helmet.

Refer to the helmet's manual for specific instructions on how to remove and replace the visor. Usually, it involves releasing a mechanism on each side.

The K3 E2206 is designed to be compatible with AGV communication systems. Check for specific compatibility details before installing any communication devices.

Please refer to the manufacturer's warranty information, typically provided with the helmet or available on the AGV website.

Yes, the cheek pads are interchangeable, allowing for a customized fit. Replacement cheek pads are available from AGV or authorized dealers.

The AGV K3 E2206 meets the ECE 22.06 safety standard.

It is recommended to replace your helmet every 5 years, or immediately after an impact.

Ensure the Pinlock® visor is properly installed and clean. Check for any damage or gaps. Consider using an anti-fog spray if needed.

Check the size guide again. If the helmet is too tight, consider a larger size or thinner cheek pads. If it's too loose, a smaller size or thicker cheek pads might be necessary.

Check for any obstructions. Clean the mechanism and ensure it is not damaged. Refer to the manual for specific instructions.

Clean the visor carefully with a soft cloth and avoid abrasive cleaners. Consider using a visor protector.