Monarch Water Softener Salt Pillow Tablets - 10kg Bag

Add salt when the salt level drops below the recommended level in your water softener's tank, usually about one-quarter full. The frequency depends on your water usage and hardness.

The salt should dissolve gradually. Check the tank periodically for any solid salt bridges or excessive buildup of undissolved salt.

Clumping usually occurs due to moisture. Try to break up the clumps manually. Ensure the salt is stored in a dry place to prevent this.

Yes, Monarch Salt Pillow Tablets are designed to be compatible with most water softeners. Always check your softener's manual for specific instructions.

Store the bags in a dry, cool place, off the floor, and away from direct sunlight to prevent the salt from absorbing moisture.

The salt tablets have an indefinite shelf life if stored properly in a dry environment. Check the packaging for any specific expiry information.

BS EN973 is a European standard that specifies the requirements for salt used in water softening. It ensures the salt meets certain quality and purity standards.

Turn off the water supply to the softener. Remove any remaining salt, then clean the tank with a brush and water to remove sediment and debris. Rinse thoroughly.

Check the salt level and add more tablets if low. Ensure the tablets are dissolving properly and that there are no salt bridges in the tank.

Carefully break up the salt bridge with a blunt object. Check the water level to ensure it's not too high.

Inspect for any blockage or sediment in the system. Clean or replace filters as needed. Check and clean the brine tank.