A S Creation Wallpaper - Grey - Geometric

Use a high-quality paste specifically designed for vinyl or textured wallpapers. Follow the paste manufacturer's recommendations for application.

While it is textured vinyl, it is not designed for high-moisture environments. For bathrooms, consider applying a specific vinyl sealant after installation.

Textured vinyl wallpapers are generally strippable. Start at a seam and pull downwards. If difficult, use a wallpaper steamer or a mixture of warm water and mild detergent.

The pattern repeat is 53 cm. This means the design pattern repeats every 53 cm down the roll.

Calculate the total square meterage of your walls and divide by the coverage of one roll (53cm width x 1005cm length = 5.33 sqm per roll). Always round up to the nearest whole roll and account for the pattern repeat.

While efforts are made to ensure color consistency, slight variations can occur between production batches. It's advisable to purchase all necessary rolls from the same batch if possible.

Gently lift the affected area and re-smooth with a wallpaper brush, working from the center outwards. If dried, small bubbles may dissipate, or a pinprick can release trapped air.

Carefully adjust the position of the wallpaper strip before the paste sets. Ensure the straight match is correctly aligned with the previous strip. If significant waste occurs due to miscalculation, re-measure and re-cut.

Use a sharp utility knife and a straight edge for clean cuts. Change the blade frequently as dull blades can tear the wallpaper.

Work in smaller sections and ensure a consistent application of paste. Check room temperature; extreme heat can accelerate drying.