Best current price£16.87from PCHUB.UK
Shopping.co.uk recommended and popular offers
PCHUB.UK£16.87Visit shop Startech.com Brocade 57-0000075-01 Compatible Sfp+ Module - 10Gbase-Sr
Visit shop
Amazon£30.98Visit shop StarTech.com Dell EMC SFP-1G-BX80-U Compatible SFP Module - 1000BASE-BX-U - 1 Gigabit Ethernet BiDi Fiber Single Strand SFP - LC 80km (SFP1GBX80UES)
Visit shop38 offers from £16.87 - £230.06
View price history by clicking the chart icon.
This StarTech.com SFP+ transceiver module (J9150D-ST) is designed for network administrators and IT professionals seeking reliable 10GbE connectivity over multi-mode fiber. Its key benefit is ensuring seamless integration with HPE equipment and other MSA-compliant switches, offering a cost-effective alternative to proprietary modules. A potential caveat is its multi-mode fiber limitation, restricting its use to shorter distances compared to single-mode transceivers. The module supports 10GBASE-SR standards, operates at an 850nm wavelength, and connects via an LC port, supporting distances up to 300m. It features hot-swappable capability, Digital Diagnostics Monitoring (DDM), and a low power consumption of under 1.3W.
| Series | SFP+ |
|---|---|
| Model Part Number | J9150D-ST |
| Brand | StarTech.com |
No, this module is designed for multi-mode fiber (MMF) and supports the 10GBASE-SR standard, which has a maximum distance of 300 meters. Single-mode fiber is used for longer distances.
Hot-swappable means you can install or remove the SFP+ module from a network device while the device is powered on and the network is operational, without needing to shut down the system.
DDM information is typically accessed through the command-line interface (CLI) or graphical user interface (GUI) of your network switch or router. Consult your network device's manual for specific commands or navigation paths.
The StarTech.com J9150D-ST SFP+ module is backed by a lifetime limited manufacturer warranty.
Yes, this module is MSA compliant and designed to work with a variety of network switches from brands like Ubiquiti, D-Link, Netgear, Supermicro, and TP-Link, provided they accept uncoded SFP+ modules.
The wavelength of this module is 850 nm, which is typical for 10GBASE-SR multi-mode fiber transceivers.
The maximum data transfer rate supported by this module is 10 Gbps (Gigabits per second).
Ensure the module is fully seated in the SFP+ port. Verify that the switch firmware is up-to-date. Check if the switch specifically requires coded modules if this one is uncoded. Try the module in a different port or switch to isolate the issue.
Check the fiber optic cable connection at both ends for a secure fit. Inspect the cable for damage. Ensure the correct type of multi-mode fiber is used. Verify that the SFP+ module and the port on the other end are configured for the same speed and duplex settings.
Confirm that both the SFP+ module and the connected device port are operating at 10Gb/s. Check for any bottlenecks in the network path. Ensure the fiber optic cable is not damaged and is clean.
Investigate the specific DDM reading. For example, low optical output power could indicate a dirty connector or a failing module. High temperature may suggest inadequate ventilation. Consult your switch's documentation for acceptable DDM ranges.
Setup:
Compatibility:
Care:
