Best current price£11.24from RS Components Ltd- UK
Shopping.co.uk recommended and popular offers
RS Components Ltd- UK£11.24Visit shop Schneider Electric, Harmony XB5, Panel Mount Yellow LED Pilot Light Complete, 22mm Cutout, IP66, 24 V ac/dc
Visit shop31 offers from £11.24 - £61.82
View price history by clicking the chart icon.
This Schneider Electric XB5 handle selector switch is designed for industrial control panels and machinery where clear operational control is essential. Its primary benefit is providing reliable 3-position selection with a robust IP67 rating for protection against dust and water. A potential caveat for some users may be its spring-return action, which requires a deliberate action to maintain a selected position.
| Brand | Schneider Electric |
|---|
IP67 means the switch is protected against dust ingress and can withstand immersion in water up to 1 meter for 30 minutes, making it suitable for harsh and wet industrial environments.
Normally Open (NO) contacts are open (not conducting) when the switch is in its default state and close (conduct) when activated. Normally Closed (NC) contacts do the opposite: they are closed by default and open when activated. This switch has 2 NO contacts.
This specific model features a spring-return action, meaning it returns to its neutral position when released. While it can be used to initiate actions, it is not a self-holding or latching switch. For latching, you would typically use a selector switch with a detent mechanism or a momentary button in conjunction with a relay.
The switch is rated for 1,000,000 cycles for both mechanical durability (physical operations) and electrical durability (operations under load).
A standard 22mm diameter cutout is required for mounting this selector switch.
The switch can operate reliably in temperatures ranging from -40°C to +70°C.
This is a complete unit, including the grey bezel, handle, and contact blocks, ready for panel mounting.
Check wiring connections to ensure they are secure and correctly placed on the NO contacts. Verify that the mechanical linkage for that position is not obstructed.
Inspect the gasket and mounting area for damage. Replace any damaged seals. Ensure the switch is mounted correctly and securely to the panel to maintain the seal.
Ensure the switch is firmly mounted to the panel. Check for excessive vibration in the environment, which might necessitate a switch with a more robust mechanical detent if spring-return is insufficient. Clean terminal connections.
Setup: The XB5 selector switch is designed for panel mounting. It requires a standard 22mm diameter cutout in the control panel. The switch unit typically mounts from the front, with a locking nut or mounting clip securing it from the back of the panel. Wiring is done via screw terminals located on the contact blocks.
Compatibility: This switch is compatible with standard industrial control panels and enclosures designed for 22mm pilot devices. It features 2 Normally Open (NO) contacts, which should be considered when designing control circuits. The operating temperature range is -40°C to 70°C.
Care: To maintain optimal performance and longevity:
