Laser Hex Bit - 3/8" Drive - 6mm - 300mm

This 3/8" drive, 6mm hex bit is specifically designed for servicing the 6-speed manual gearbox on Volkswagen Sharan (1996 onwards) and Transporter (2004 onwards) models, as an equivalent to OEM T10107.

The bit is manufactured from S2 steel, known for its strength and durability, while the socket is made from chrome vanadium steel.

While it has a 3/8" drive, it is generally recommended for use with manual ratchets or torque wrenches. If used with an impact wrench, do so with caution and at lower settings to prevent premature wear or damage to the bit or fastener.

It means this tool is designed to perform the same function and meet the same specifications as the original equipment manufacturer's tool designated as T10107.

The hex bit is 300mm (approximately 11.8 inches) long, providing extended reach.

Ensure your ratchet has a standard 3/8" square drive female socket. If it still doesn't fit, the ratchet's socket might be worn, or you may have an unusual drive size.

This guide refers to the 300mm version. For applications requiring an equivalent to OEM T10107A, Laser Part No. 8573 should be consulted, which may differ in length or other specifications.

Ensure you are using the correct 6mm hex size and that the fastener head is clean and free of debris. Verify the bit is fully seated in the fastener recess.

Check that the 3/8" square drive of the bit is fully inserted into the ratchet socket. Ensure the ratchet's drive mechanism is functioning correctly and not worn.

While the bit is designed for reach, ensure there are no obstructions in the path. Check if the vehicle service manual suggests an alternative tool or procedure for extremely tight access.

Discontinue use immediately. A damaged bit can strip fasteners. Replace the bit with a new one to avoid further damage to the fastener or tool.