Autotek Fluorescent Paint - Blue - 300ml

It is ideal for use on surfaces requiring high visibility such as safety equipment, signs, warning markings, skips, and bicycles. It adheres well to metal, wood, and some plastics.

The paint is touch dry in 10-20 minutes. It needs to be left to fully cure for 24 hours.

Yes, the paint dries to a matt finish by default. You can achieve a glossier finish and added durability by applying Autotek Clear Lacquer once the fluorescent paint is touch dry.

The paint should be applied in temperatures between 15°C and 25°C for optimal performance and drying.

Yes, it is designed for applications requiring high visibility. However, it must be used outdoors or in a well-ventilated area due to the aerosol propellants.

After each use, turn the can upside down and spray for 2-5 seconds to clear the nozzle. If it becomes blocked, you can try soaking the nozzle in warm water or using a specialized nozzle cleaner.

The range is available in Pink, Yellow, Orange, Green, and Blue.

Ensure the can is shaken sufficiently before and during use. Clear the nozzle by spraying upside down for a few seconds after each application. If the nozzle is blocked, try soaking it in warm water and drying thoroughly.

Make sure the surface is properly cleaned, dried, and free from grease, oil, or dust. For difficult surfaces, a suitable primer might be necessary (check compatibility).

Ensure thin coats are applied evenly. Apply more thin coats if necessary, allowing adequate drying time between each. For best results, apply to a light or white primer.

After use, always invert the can and spray for 2-5 seconds to clear the valve and nozzle. If blockage occurs, attempt to clear with warm water or a solvent recommended for spray paint nozzles.