BlueSpot 6Pcs Die Set with Holder - M6-M12

The die set can be used on a variety of materials, including mild steel, aluminum, and some plastics. Always check material suitability before use.

Select the die based on the thread size (e.g., M6, M8, M10) and pitch (e.g., 1.0, 1.25, 1.5) required for your application. These specifications should match the bolt or threaded component you are working with.

Cutting oil reduces friction and heat buildup during thread cutting, extending the life of the dies and improving the quality of the threads. It also helps to remove chips.

Clean the dies after each use to remove debris and prevent corrosion. Store the set in a dry place and inspect the dies regularly for wear and tear.

The die set is manufactured from alloy steel, which can cut threads in a wide range of materials, but may not be ideal for cutting threads in hardened steel. Always verify material compatibility.

Individual dies can be replaced. Contact a supplier to purchase a replacement of the damaged die.

Yes, the set includes a die holder to securely hold the die during use.

Ensure the die is aligned perpendicular to the material before starting. Apply even pressure during the threading process. If the issue persists, check the die for damage.

Ensure the die is the correct size for the application and is properly aligned. Apply cutting oil to the material to reduce friction and wear. Replace worn or damaged dies.

Tighten the fasteners on the die holder. Check for damage to the holder and replace if necessary. Make sure the die is properly seated in the holder.

Apply cutting oil to the material to ease the process. Ensure the material is clamped securely. Apply even pressure when turning the die.