Evolution Aqua EazyPod/Surge Replacement PLL UV Lamp - 18w - CUV-118-18w-LAMP

The Evolution Aqua EazyPod/Surge Replacement 18w PLL UV Lamp is a genuine Osram replacement part d...

Best current price£21.89from eBay

All Offers

2 offers from £21.89

View price history by clicking the chart icon.

eBayEvolution Aqua EazyPod/Surge Replacement 18w PLL UV Lamp
£3.99 delivery
£21.89
Visit shop
www.pond-planet.co.ukEvolution Aqua Eazypod/Surge Replacement 18W Pll Uv Lamp
£3.00 delivery
£21.89
Visit shop

Product Information

Full details

The Evolution Aqua EazyPod/Surge Replacement 18w PLL UV Lamp is a genuine Osram-manufactured component specifically designed for pond owners utilizing the Evolution Aqua EazyPod and Surge filter ranges. It provides the essential UV light required to neutralize free-floating algae, ensuring clear and healthy water for your fish. While it is highly efficient at maintaining water clarity, it is important to note that UV output degrades over time, requiring consistent maintenance and seasonal replacement to remain effective.

All features

Model Part NumberCUV-118-18w-LAMP
BrandOsram

Extended Product Information

FAQs

How often should I replace this lamp?

It is recommended to replace the UV lamp every season, typically in early spring, as the UV output degrades significantly after 6-12 months of use.

Can I touch the glass of the new lamp?

Avoid touching the glass with bare hands. Use a soft cloth or gloves to prevent skin oils from causing premature damage to the glass surface.

Does this lamp fit the 24w model?

No, this is an 18w specific lamp. Using it in a 24w ballast may cause damage to the bulb or the electronic ballast unit.

Why is my water still green even with a new bulb?

If the bulb is new, ensure the quartz sleeve is clean. If the problem persists, check your filter flow rates and ensure your pond isn't overloaded with nutrients.

What is the 2G11 base?

The 2G11 is a specific 4-pin connector base used for compact fluorescent PLL lamps, ensuring a secure and electrical connection in the filter housing.

Troubleshooting

Pond water remains green after replacement

Check if the quartz sleeve is dirty or calcified and clean it with a mild vinegar solution; also ensure the lamp is fully seated in the socket.

Lamp flickers or fails to strike

Inspect the connection pins for corrosion and ensure the UVC ballast is providing stable power.

Pros and Cons

Pros

  • Genuine Osram product ensuring reliability and manufacturer compatibility
  • Easy to install with standardized 2G11 base
  • Direct fit for Evolution Aqua filter systems
  • Effective at neutralizing green water algae

Cons

  • Requires annual replacement for optimal efficiency
  • Fragile glass component requires careful handling
  • UV output is not visible to the human eye, making it hard to judge lifespan without experience

Setup, Compatibility & Care

Compatibility

This 18w bulb is compatible with:

  • Evolution Aqua EazyPod Complete
  • Evolution Aqua EazyPod UV Automatic
  • Evolution Aqua Surge Filters (18w UVC variant)

Installation

  1. Ensure the power to the UVC unit is completely disconnected.
  2. Allow the unit to cool down for at least 15 minutes.
  3. Carefully open the UVC housing to expose the old lamp.
  4. Gently slide the old lamp out of the 2G11 socket.
  5. Align the new lamp pins with the socket and push firmly until it clicks.
  6. Wipe the quartz sleeve with a clean cloth before sealing the housing.

Care

Always handle the new glass bulb with a clean cloth or gloves, as oils from human skin can create hot spots on the glass, potentially shortening the lifespan of the lamp.

Price History

DatePrice
Visit shop