Cca A2 Adhesive V Notch Trowel - Hardwood Handle

This trowel is specifically designed for spreading pressure-sensitive adhesives required for LVT, Amtico, and Karndean flooring installations.

The notch specifications are 1.0mm in depth by 3mm centres.

It is best suited for pressure-sensitive adhesives used with LVT and similar flooring. Always check your adhesive manufacturer's recommendations to ensure compatibility with the notch size.

Gently use the trowel on an angle, typically between 40-60 degrees, to spread the adhesive evenly and create the correct bead.

The trowel is designed as a reusable unit; both the tempered steel blade and the handle are reusable. The screws are not countersunk as you can use the 4 edges and change the blade.

After use, clean the tempered steel blade thoroughly to remove any adhesive residue. A brush or scraper can be used. Store in a dry environment.

The V-notch design ensures a consistent and even application of adhesive, creating the precise bead needed for effective bonding of specific flooring types like LVT.

Ensure the trowel is held at the correct angle (40-60 degrees) and that the notches are clean and free from dried adhesive. Check that the adhesive consistency is appropriate for the trowel's notch size.

Verify that the specific adhesive is compatible with the trowel's V-notch specifications (1.0mm depth x 3mm centres). Some adhesives may require different notch sizes or trowel types.

Ensure a firm grip on the wooden handle. For extended periods, consider using work gloves. The handle is designed for a standard grip.