Expanded Metal Brickwork Reinforcement Galvanised Mesh Roll - Silver - FN118

It is typically embedded in the mortar joints every third course of bricks or blocks for optimal reinforcement.

Its primary benefit is to strengthen masonry walls, reduce cracking, and improve resistance to vibrations and external loads.

Yes, it is manufactured from galvanized steel, making it suitable for both internal and external environments.

The width of the coil is 63mm, and the total length of the coil is approximately 20 meters (about 66 feet).

It is compatible with standard cement-based mortars commonly used in bricklaying and blockwork.

Yes, the expanded metal mesh is non-combustible.

Standard metal shears or heavy-duty snips are usually sufficient for cutting the mesh to size.

Ensure you are using appropriate metal shears or cutting tools designed for this type of material. For thicker applications, a grinder with a cutting disc may be necessary.

Make sure the mortar is fresh and mixed to the correct consistency. Ensure the mesh is free from dirt or grease before embedding.

This is unlikely with a properly galvanized product. Check if the protective coating has been significantly damaged. Ensure the product is stored in a dry environment when not in use.