Best current price£4.98from Amazon
Shopping.co.uk recommended and popular offers
Amazon£4.98Visit shop Durable 170304 Pitch marking stripes, self-adhesive and abrasion-resistant, RAL 1003 signal yellow
Visit shop38 offers from £4.98 - £33.59
View price history by clicking the chart icon.
This guide is for facility managers, safety officers, and warehouse supervisors who need to clearly mark areas in indoor environments. The key benefit is improved safety and organization through highly visible, durable floor markings. A caveat is that they are designed for permanent application and may require effort to remove. These yellow, 100mm diameter dots offer a simple yet effective solution for indicating hazards, storage zones, and walkways with their abrasion-resistant and R9 slip-resistant surface.
| Model Part Number | 170404 |
|---|---|
| Brand | Durable |
The R9 rating (according to DIN 51130) indicates a low angle of slip resistance, meaning the surface offers a good level of protection against slips in normal indoor conditions, especially when compared to untreated surfaces. It's suitable for areas with light to moderate foot traffic.
No, these floor markings are specifically designed for indoor use. Exposure to outdoor elements like rain, UV light, and extreme temperatures can affect their adhesion and durability.
The lifespan depends on the level of foot traffic and maintenance. They are designed to be abrasion-resistant and hard-wearing for extended periods in typical indoor environments. Heavy, continuous traffic or improper cleaning may reduce their longevity.
The product information does not specify the exact material composition but highlights its abrasion resistance and hard-wearing properties, suggesting a durable polymer or vinyl suitable for floor applications.
It is best to wait until the floor is completely dry and cured after cleaning or sealing before applying the markings. Applying to a damp or uncured surface will compromise adhesion.
This range includes other shapes such as crosses, arrows, and dashes, allowing for comprehensive and varied floor marking strategies.
Ensure the floor surface is thoroughly cleaned, dried, and free of any contaminants. Check that the surface temperature is adequate for application (above 10°C). Apply firm, even pressure during application, potentially using a roller.
Re-apply pressure to the edges, ensuring they are fully bonded to the floor. If the adhesive has significantly degraded, the marking may need to be replaced.
This indicates excessive wear. While durable, extreme abrasion will eventually affect the surface. Consider if the area has unusually high traffic or if a more robust solution is needed. Clean gently as per care instructions.
Due to the permanent adhesive, removal can be challenging. Gently heat the marking with a hairdryer or heat gun (use caution not to damage the floor), then carefully peel it up. Residual adhesive may require a solvent-based cleaner suitable for your flooring type.
Setup:
Compatibility:
These floor markings are designed for use on smooth, sealed indoor flooring surfaces such as concrete, linoleum, tile, and sealed wood. They are not intended for use on carpets, rough outdoor surfaces, or areas with constant heavy vehicular traffic that exceeds standard foot traffic.
Care:
Clean the markings regularly using standard floor cleaning methods (e.g., sweeping, damp mopping). Avoid using abrasive cleaners or power washers directly on the markings, as this may degrade the surface over time. If the markings become soiled, a mild detergent and water solution can be used, followed by rinsing and drying.
