Best current price£5.97from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£5.97Visit shop Antex - Replacement Soldering Iron Sponge
Visit shop
B&Q£6.41Visit shop B&Q - AntexReplacement Soldering Iron Sponge
Visit shop3 offers from £5.97 - £6.41
View price history by clicking the chart icon.
This Antex Soldering Iron Sponge is for electronics hobbyists and professionals who need to maintain a clean soldering iron tip for optimal performance. Its key benefit is providing a durable and effective way to remove excess solder and oxidation, ensuring better solder joints. A potential caveat is that its effectiveness relies on proper usage and occasional re-wetting.
| Model Part Number | Y023150 |
|---|---|
| Brand | Antex |
You should wet the sponge before each use, or whenever it appears dry. It needs to be moist to create steam for effective cleaning.
No, using the sponge dry is not recommended as it can lead to oxidation and potential damage to the soldering iron tip.
Distilled or deionized water is recommended to prevent mineral buildup on the sponge and soldering iron tip, although clean tap water can be used in a pinch.
Replace the sponge when it becomes visibly worn, discolored, starts to break apart, or no longer effectively cleans your soldering iron tip.
The sponge is approximately 140mm in length and 100mm in width.
It is suitable for most soldering irons provided the cleaning station can accommodate its size. Its primary function is cleaning the tip, which is universal.
Ensure the sponge is adequately dampened with water. If it's too dry, it won't create enough steam to clean effectively. If it's too wet, it can cool the tip too much. Rinse the sponge to remove any accumulated residue that might be hindering performance.
This may indicate the sponge is of poor quality or is being used incorrectly. Ensure you are only using it for cleaning, not for prolonged contact or scraping. If the issue persists, consider replacing the sponge with a new one.
The tip may be oxidized. Ensure the sponge is used after tinning the tip. If oxidation is severe, you may need to use a tip tinning solution in conjunction with the sponge.
Setup: This sponge is designed to be used with a soldering iron tip cleaning station. It requires wetting before use. Typically, you should dampen the sponge with water – avoid soaking it. It should be moist enough to create steam when the hot iron tip touches it, but not so wet that it cools the tip down excessively.
Compatibility: This sponge is compatible with most standard soldering iron tip cleaning stations that accommodate sponges of its approximate size (140mm x 100mm). It is designed for use with typical leaded and lead-free solders.
Care: To prolong the life of the sponge, rinse it periodically with clean water to remove accumulated solder and flux residue. Allow it to air dry completely after rinsing. Replace the sponge when it becomes overly worn, discolored, or no longer effectively cleans the soldering iron tip.
