Blackfriar Metal Paint - Black - 250ml

This paint is specifically designed for metal and wood. Compatibility with plastics can vary; testing on a small, inconspicuous area is recommended first.

Drying times vary depending on the temperature and humidity. Typically, it is touch dry in 1-2 hours and ready for a second coat in 4-6 hours. Always refer to the specific instructions on the product tin.

Clean brushes and equipment immediately after use with white spirit or a similar solvent.

The paint offers resistance to heat up to 150 degrees Celsius.

It provides a tough finish, suitable for moderate use. For areas with very heavy wear or abrasion, additional protective coatings or more robust paint systems may be necessary.

For best results and maximum durability, especially on bare metal, applying a suitable metal primer is recommended. Ensure the primer is compatible with this paint.

Yes, provided the existing paint is sound and well-adhered. Lightly abrade the surface and ensure it is clean and dry before applying Blackfriar Metal Paint.

Ensure the surface was properly prepared, clean, and dry before application. Re-sand and clean the surface, then reapply.

Ensure the paint was thoroughly stirred and applied evenly. Use a good quality brush or roller and avoid overloading it. Apply in thin, even coats.

Check environmental conditions; drying times are longer in cold or humid weather. Ensure adequate ventilation. If applied too thickly, it may take longer to cure.

Ensure the surface was properly prepared and that no contaminants affected the finish. Ensure adequate ventilation during drying and avoid applying in dusty conditions.