Best current price£15.37from eBay
Shopping.co.uk recommended and popular offers
eBay£15.37Visit shop Connect 90� Angled Fuel Line Quick Connectors 11.8 x 10mm 3pc 37210
Visit shop
Amazon£17.42Visit shop Connect 37210 Fuel Line Angled Quick Connectors 11.8mm x 10mm 3pc
Visit shop7 offers from £15.37 - £18.44
View price history by clicking the chart icon.
This 3-piece set of Connect Fuel Line Quick Connectors is designed for automotive applications, offering a convenient 90° angle for tight spaces and compatibility with standard fuel lines. Its key benefit is enabling secure, leak-free connections for 10mm ID Nylon Pipe and 12mm ID Rubber Hose. A potential caveat is the 5 Bar maximum working pressure, which users should verify against their system requirements.
| Model Part Number | 37210 |
|---|---|
| Brand | Connect |
These connectors are designed for 10mm ID Nylon Pipe and 12mm ID Rubber Hose.
The maximum working pressure for these connectors is 5 Bar.
The seals are made of Viton, known for its excellent resistance to fuels and chemicals.
Yes, they are suitable for standard automotive fuel types, including gasoline and diesel.
Push the hose firmly onto the barbed end until it is fully seated. A secure connection is crucial to prevent leaks.
The grey tab is used for fuel identification, helping to distinguish different fuel lines within a system.
Each pack contains 3 pieces of the fuel line quick connectors.
Ensure the correct hose ID (10mm Nylon or 12mm Rubber) is being used. Verify the hose is pushed on completely until fully seated. Check the hose for any damage or deformation that may prevent a secure fit. The hose may need to be slightly warmed to ease installation.
Disconnect and reconnect the hose, ensuring it is fully seated. Inspect the Viton seals for any damage or debris. Verify the hose material is compatible with the connector and fuel type. Confirm the system pressure does not exceed the connector's 5 Bar limit.
Slightly warm the end of the rubber hose with warm water (not hot) to make it more pliable. Ensure the connector's barb is clear of obstructions. Use a gentle twisting motion while pushing.
Setup: Ensure the ends of the 10mm ID Nylon Pipe or 12mm ID Rubber Hose are clean and free of debris. Firmly push the hose onto the appropriate barbed end of the connector until it is fully seated. A secure click may be felt or heard when properly engaged. Compatibility: This connector is designed for fuel lines with a 10mm internal diameter (ID) for Nylon Pipe and a 12mm internal diameter (ID) for Rubber Hose. It is rated for a maximum working pressure of 5 Bar and is suitable for standard automotive fuel types. Care: Periodically inspect connectors for signs of wear, cracking, or damage. Clean the exterior with a damp cloth if necessary; avoid using harsh solvents that could degrade the Nylon PA12 material. Ensure connections remain secure and free from leaks.
