JCP CONSTRUCTION PRODUCTS Spring Toggles - M5/14 - Box of 100 - Silver

These M5/14 spring toggles are designed to work with M5 screws. The length of the screw will depend on the thickness of the material you are fixing and the depth of the toggle.

No, these spring toggles are specifically designed for hollow wall applications like plasterboard and drywall. They will not work effectively in solid materials like brick or concrete.

The weight-bearing capacity depends on the specific wall material, the condition of the wall, and the proper installation of the toggle. Always refer to manufacturer guidelines and consider a safety margin for heavy items.

You will need a drill with an appropriate size drill bit to create the hole, and a screwdriver to insert and tighten the screw. The toggles themselves are designed for manual installation.

'M5' refers to the thread size of the screw the toggle is designed to accept (M5 diameter), and '14' likely refers to a key dimension such as the diameter of the toggle head or the span of the wings.

While the toggle can technically be unscrewed, it is generally not recommended for reuse as the wings may have bent or the wall material around the hole could be compromised, affecting re-installation security.

Ensure the hole drilled is the correct size specified for the M5/14 toggle. If the hole is too small, the wings may not open. If the hole is too large, the toggle may not seat properly.

Verify that you are using an M5 screw. Ensure the toggle is fully seated against the wall and that its wings are properly deployed. Check that no debris is obstructing the toggle's internal thread.

The hole may be too large, or the wall material might be compromised. Re-evaluate the hole size and wall integrity. For very thin plasterboard, consider alternative fixings if excessive weight is being applied.