Anker SOLIX PS30 Portable Solar Panel - Grey - Solix
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Anker SOLIX PS30 is a versatile, portable solar panel designed for outdoor enthusiasts and travelers who need reliable power on the go. Its 30W output with USB-A and USB-C ports makes it ideal for charging essential personal electronics, even in challenging weather conditions, though its compact size means it's best suited for smaller devices rather than high-power appliances.
All features
| Colour | Grey |
|---|---|
| Series | Solix |
| Model Part Number | PS30 |
| Brand | Anker SOLIX |
Extended Product Information
FAQs
Can I charge a laptop with the Anker SOLIX PS30?
While the Anker SOLIX PS30 provides 30W of power, most laptops require higher wattage (typically 45W-65W or more) and specific charging protocols not always supported by the panel's USB-A/USB-C ports. It is primarily designed for smaller electronic devices like smartphones, tablets, and cameras.
Is the Anker SOLIX PS30 waterproof?
The Anker SOLIX PS30 is IP65 weather-resistant, meaning it is protected against dust ingress and low-pressure water jets (like rain or splashes). It is not designed to be submerged in water.
Does the solar panel store power?
No, the Anker SOLIX PS30 is a direct-to-device solar charger. It converts sunlight into electricity as it's being received and passes it directly to your connected devices. It does not have an internal battery to store power. For power storage, you can connect a compatible power bank to the solar panel to charge it.
How long does it take to charge a smartphone?
Charging time varies significantly based on sunlight intensity, the device's battery size, and its charging efficiency. Under ideal, direct sunlight conditions, a typical smartphone could charge in approximately 2-4 hours, similar to a wall charger.
What is the warranty for the Anker SOLIX PS30?
The Anker SOLIX PS30 Portable Solar Panel comes with an 18-month worry-free warranty. For warranty claims or support, please refer to the contact information in your user manual or visit the official Anker support website.
Can I link multiple PS30 panels together for more power?
The Anker SOLIX PS30 is designed as a standalone charging solution. The provided ports are for device output, not for chaining multiple panels. If you require more power, consider a higher wattage Anker SOLIX solar panel model.
Troubleshooting
Device is not charging or charging very slowly.
Ensure the solar panel is in direct, unobstructed sunlight. Reposition it to face the sun directly. Check for any dirt or debris on the panel surface and clean it. Verify that the USB cable is fully connected to both the panel and your device. Try a different USB cable to rule out cable issues.
Panel feels warm during operation.
It is normal for solar panels to get warm when exposed to direct sunlight and generating power. This is not typically an issue. However, ensure the control box with the USB ports is not covered to allow for proper ventilation.
No power output in cloudy conditions.
Solar panels require direct sunlight for optimal performance. In cloudy or overcast conditions, power output will be significantly reduced or non-existent. This is normal for solar technology. Wait for brighter conditions or use an alternative power source.
Carabiners broke or are missing.
The product includes two carabiners. If they are missing from the package, contact customer service. If they break due to wear and tear, standard replacement carabiners can be purchased from most outdoor or hardware stores.
Pros and Cons
Pros
- Excellent Portability: Lightweight and foldable design makes it incredibly easy to carry for camping, hiking, and travel.
- Weather-Resistant: IP65 rating provides peace of mind for outdoor use in various conditions.
- Versatile Charging: Includes both USB-A and USB-C outputs for broad compatibility with modern devices.
- Environmentally Friendly: Utilizes clean solar energy, reducing reliance on grid power.
- Simple Setup: Unfold, position towards the sun, and connect your devices.
Cons
- Limited Power Output: 30W is suitable for small electronics but may be slow or insufficient for larger devices like laptops or power-hungry items.
- Sunlight Dependent: Performance is directly tied to sunlight availability and intensity, which can vary.
- No Integrated Battery: Requires devices to be charged directly from the panel; does not store power itself.
Setup, Compatibility & Care
Setup Instructions
- Unfold the Panel: Carefully unfold the Anker SOLIX PS30 until it is fully extended.
- Position for Sunlight: Place the panel in a location where it receives direct, unobstructed sunlight. Use the built-in kickstands (if available, common on similar panels) or the included carabiners to angle it towards the sun. For maximum efficiency, aim for a 90-degree angle to the sun's rays.
- Connect Devices: Plug your devices into the available USB-A or USB-C ports on the control box. Ensure the connections are secure.
- Monitor Charging: Your device should begin charging. Charging indicators (if any) on your device or the panel will confirm active charging.
Compatibility
The Anker SOLIX PS30 is broadly compatible with most USB-powered devices, including:
- Smartphones (iOS, Android)
- Tablets
- Action cameras
- GPS devices
- Portable power banks (to store energy for later use)
- Other small USB-chargeable electronics
Care & Maintenance
- Cleaning: Regularly wipe the solar panel surface with a soft, damp cloth to remove dirt, dust, and grime that can impede efficiency. Avoid abrasive cleaners or brushes.
- Storage: When not in use, fold the panel neatly and store it in a cool, dry place away from direct sunlight and extreme temperatures.
- Water Exposure: While IP65 rated for weather resistance, avoid prolonged submersion in water or exposure to heavy downpours. Wipe dry after exposure to moisture.
- Handling: Avoid dropping the panel or subjecting it to sharp impacts. Do not attempt to modify or disassemble the unit.