SmallRig Ultra Slim 4K HDMI Cable - 3041

The SmallRig Ultra Slim 4K HDMI Cable (C to A) is a high-quality connection solution designed spec...

Best current price£11.90from Wex Photo Video

One Offer

1 offer from £11.90

View price history by clicking the chart icon.

Wex Photo VideoSmallRig 3041 Ultra Slim HDMI Cable - Mini HDMI to HDMI - 55cm - Black
£3.99 delivery
£11.90
Visit shop

Product Information

Full details

The SmallRig Ultra Slim 4K HDMI Cable (C to A) is an essential accessory for videographers and photographers looking to streamline their camera rigs without compromising signal quality. Featuring a flexible 3.6mm diameter design and support for 4K at 60Hz, it provides a reliable connection for high-resolution monitoring and recording. While it is perfect for compact setups, users should note its 55cm fixed length, which may be too short for larger studio configurations requiring extended cable runs.

All features

Model Part Number3041
BrandSmallRig

Extended Product Information

FAQs

Does this cable support 3D or HDR?

Yes, as an HDMI 2.0 cable, it supports standard high-definition features, including 4K resolution at 60Hz.

Can I use this for a gimbal setup?

Yes, its ultra-slim and flexible design makes it excellent for gimbals where weight and cable resistance can affect motor performance.

Is the cable shielded?

The cable uses high-quality materials to ensure signal integrity, but it is primarily designed for its flexibility and compact form factor.

What is the primary material of the cable jacket?

The cable is jacketed in a mix of Nylon and Polyvinyl Chloride (PVC) for a balance of flexibility and strength.

Will this work with a Micro HDMI camera?

No, this cable has a Mini HDMI (Type C) connector. Please check your camera manual to ensure you do not require a Micro HDMI (Type D) cable.

Troubleshooting

No signal on external monitor

Ensure both ends are firmly seated. Verify that the camera's output settings are set to match the monitor's supported resolution.

Intermittent signal flicker

Check if the cable is being pulled tight; use the cable tie to create a service loop so the cable stays relaxed at the connection point.

Cable seems too short

Re-route the cable along the most direct path of your rig or consider using a dedicated cable clamp to anchor the position.

Pros and Cons

Pros

  • Extremely lightweight and flexible
  • Does not block neighboring camera ports
  • Supports high-bandwidth 4K 60Hz signals
  • Included cable tie aids in organization

Cons

  • Fixed 55cm length may limit reach on larger rigs
  • Straight connector design may not fit all gimbal orientations
  • Not intended for long-distance cable runs

Setup, Compatibility & Care

Setup: To install, ensure your camera’s Mini HDMI (Type C) port is free of debris. Connect the Mini end to your camera and the standard (Type A) end to your monitor or recorder. Always use the included cable tie to secure the cable to your camera cage; this acts as a strain relief, which is the most important step in preventing port failure.

Compatibility: This cable is compatible with any device featuring a Mini HDMI output and standard HDMI input (monitors, capture cards, or recorders).

Care: Avoid sharp bends near the connector housings. While the cable is flexible, treating the junction point with care will significantly extend its lifespan. Clean with a dry, lint-free cloth if exposed to dust or moisture.

Similar items

Price History

DatePrice
Visit shop