Festool Cordless Impact Driver - TID 18 C

The brushless EC-TEC motor offers increased efficiency, a longer lifespan, and more power compared to brushed motors.

While it can sometimes drive smaller bits in wood, it is primarily designed for impact driving screws. For drilling, a dedicated drill or hammer drill is recommended.

Battery life depends on the specific task and battery capacity used. However, the TID 18 C is designed for maximum performance and endurance with its battery packs.

It is effective for a wide range of screws, particularly those requiring significant torque, such as long wood screws and lag bolts. Always use the appropriate bit size.

The TID 18 C is compatible with all Festool 18V battery packs within the current system.

Wipe the exterior with a dry or slightly damp cloth. Ensure ventilation openings are clear of dust and debris. Avoid using solvents or harsh cleaners.

Festool typically offers a comprehensive warranty on their tools. Please refer to the official Festool warranty documentation for specific details.

Ensure the battery is fully charged and properly inserted. Check if the forward/reverse switch is in the neutral position.

The battery may be low on charge, recharge the battery. Check for any obstructions in the chuck or bit holder. Ensure the correct bit is being used.

Confirm that the tool is set to impact mode (if applicable) and that the fastener requires impact. Ensure the bit is seated correctly.

Allow the tool to cool down. Ensure ventilation slots are clear of debris. Reduce the intensity of the task or take breaks.