Tascam ML-32D - 32-Channel
Best current price£2,764.00from Wex Photo Video
Best offers
Shopping.co.uk recommended and popular offers
Wex Photo Video£2,764.00Visit shop Tascam ML-32D 32-Channel Dante Converter
Visit shopWex Photo Video£2,764.00Visit shop One Offer
1 offer from £2,764.00
View price history by clicking the chart icon.
Wex Photo VideoTascam ML-32D 32-Channel Dante Converter
Free delivery in 1–3 days
£2,764.00
Visit shop
Product Information
Full details
The Tascam ML-32D is a professional-grade interface designed for sound engineers, system integrators, and studio technicians working in large-scale audio environments like concert halls, stadiums, and multi-room recording facilities. Its primary benefit is providing reliable, high-fidelity bidirectional conversion between analog gear and Dante-enabled digital networks, ensuring seamless signal integration across complex infrastructure. Users should be aware that the unit utilizes 25-pin D-sub connectors for all I/O, which necessitates pre-wiring or the purchase of breakout cables to interface with standard XLR or TRS equipment.
All features
| Model Part Number | ML-32D |
|---|---|
| Brand | Tascam |
Extended Product Information
FAQs
Does the ML-32D provide phantom power?
No, the ML-32D is a line-level converter and does not provide 48V phantom power to microphones.
Can I use this without a Dante network?
No, this device is specifically engineered for conversion into the Dante protocol and requires a Dante-enabled network to function.
What kind of cables do I need for the D-sub ports?
You need 25-pin D-sub connectors wired to the Tascam pinout standard, typically converted to XLR-F or XLR-M.
Can it operate at 48 kHz?
Yes, it supports standard sample rates including 44.1 kHz, 48 kHz, 88.2 kHz, and 96 kHz.
Is the unit fan-cooled?
The ML-32D is designed for professional rack use; ensure adequate ventilation, as it generates heat during normal operation.
How do I update the firmware?
Firmware updates are typically managed through the Dante firmware update utility or official Tascam support tools connected via the network port.
Troubleshooting
No audio detected in Dante Controller
Check that the unit is powered on and that the Ethernet cable is securely connected to both the device and the network switch.
Signal clipping on specific channels
Reduce the gain on your source analog equipment; the ML-32D indicates overload via the LED panels, signaling that the incoming signal level is too high.
Channels not appearing in the network
Verify that your Dante Controller software is up to date and that the ML-32D is on the same IP subnet as your other network devices.
Pros and Cons
Pros
- Supports high-fidelity 96 kHz/24-bit audio
- Seamless integration with Dante digital networks
- High-density channel count in a single rack-mount chassis
- Reliable signal transmission with minimal latency
- Clear visual monitoring of all 32 channels
Cons
- Requires D-sub breakout cables for standard connectivity
- Not intended for home or small-scale studio use
- Steep learning curve for those unfamiliar with Dante configuration
Setup, Compatibility & Care
To set up the ML-32D, ensure you have the appropriate D-sub to XLR or TRS breakout cables compatible with the Tascam pinout standard. Connect your analog signals to the rear panel D-sub inputs and outputs, then connect a shielded Cat6 cable to the primary Dante port. You will need to use Dante Controller software on a networked computer to route audio channels to their respective destinations. For physical care, ensure the unit is mounted in a well-ventilated 19-inch rack to prevent overheating. Regularly check the integrity of your D-sub connections, as these multi-pin connectors can loosen over time with vibration. Avoid dust accumulation in the front-panel LED area, and always ensure the device is powered via a stable, surge-protected power source.