Frenchic Wall Paint - Sugar Puff

No, this Frenchic Wall Paint is self-priming, meaning you can apply it directly to most prepared surfaces without a separate primer.

For best colour depth and durability, two coats are recommended. A single coat offers good coverage but may not achieve the full richness or protection.

It is suitable for bathroom walls and ceilings as long as they are not areas of constant high moisture or direct water contact, like shower enclosures or bath surrounds. Ensure good ventilation.

The paint has a Class 1 Wet Scrub rating, so most common household marks can be cleaned with a damp cloth or sponge. For tougher stains, use a mild detergent sparingly.

A 2.5l tin covers approximately 35m² with a single coat. Two coats will cover approximately 17.5m².

Yes, it is EN71-3 certified, making it safe for use on children's toys and furniture, and it has low VOCs with virtually no odour.

It has an ultra-matte finish, which is a non-reflective, modern, and sophisticated look.

Stir the paint thoroughly. If still too thick, add a very small amount of water (max 5-10% by volume) and mix well. Ensure the ambient temperature is not too cold.

Ensure even application by maintaining a wet edge. Use a good quality brush or roller suitable for water-based paints. Apply in consistent strokes and avoid overworking the paint.

Ensure the surface was properly prepared (clean, dry, free from dust, grease, or flaking paint). For problematic surfaces like very glossy finishes, a light sanding may improve adhesion.

Allow the paint to dry completely, as colours can sometimes appear lighter when wet. Check that two coats have been applied for full opacity and true colour representation.