Mexco TDXCEL Diamond Tile Drill Bit - 10mm

This drill bit is suitable for porcelain, ceramic tiles, and other hard materials.

No, this drill bit is designed for dry drilling and does not require water cooling.

The drill bit has an M14 thread and can be directly screwed onto an angle grinder with a compatible thread.

Yes, you can use the M14 Chuck Adaptor (part number 57587) to attach the drill bit to a mains-powered drill.

This drill bit creates a 10mm hole.

Allow the drill bit to cool down. Reduce the pressure and drilling speed.

Use a low speed and apply gentle, consistent pressure. Ensure the drill bit is perpendicular to the tile surface.

The wax filling is for high-speed drilling, which improves the drilling efficiency and performance.

Check the speed and pressure. Increase the speed slightly and apply more pressure if the bit is not cutting.

Reduce pressure and ensure the drill bit is perpendicular to the tile surface. Consider using a guide.

Allow the bit to cool down. Do not apply excessive pressure or speed.