Best current price£8.57from eBay
Shopping.co.uk recommended and popular offers
eBay£8.57Visit shop 1m x 90cm Tropea Oak Nature Wood Sticky Back Plastic Self Adhesive Vinyl
Visit shop
B&Q£8.99Visit shop B&Q - Tropea Oak Nature Wood Woodgrain Sticky Back Plastic Self Adhesive Vinyl 1M X 90Cm
Visit shop5 offers from £8.57 - £73.99
View price history by clicking the chart icon.
The D-C-Fix Tropea Oak Self-Adhesive Vinyl is ideal for DIY enthusiasts and homeowners looking to cost-effectively refresh cabinets, worktops, and furniture with a realistic woodgrain aesthetic. It offers a durable, heat-resistant surface that is easy to maintain, though it requires careful surface preparation to ensure a smooth, bubble-free application on non-porous materials.
| Colour | Brown |
|---|---|
| Model Part Number | 200-5626-15 |
| Brand | D-C-Fix |
Yes, it is suitable for worktops, provided they are smooth and you avoid placing extremely hot pans directly on the surface as the limit is 70ºC.
It is water-resistant, making it excellent for cleaning spills, but it should not be submerged or used in areas with constant standing water.
Yes, it can usually be removed by gently warming it with a hair dryer to soften the adhesive, allowing it to peel away without damaging the surface.
It sticks best to sealed or lacquered wood. Raw or porous wood should be primed or sealed first to ensure the adhesive holds correctly.
Simply use a soft cloth with warm soapy water. Avoid bleach or abrasive scouring pads.
Gently lift the affected area and re-apply slowly; if a bubble persists, use a fine needle to prick the bubble and smooth it down.
Use a hair dryer to warm the vinyl slightly, which increases adhesive flexibility, then press firmly around the edge to bond.
Ensure the surface was thoroughly degreased prior to application; you can use a small amount of contact adhesive for reinforcement if necessary.
To ensure success, ensure the target surface is clean, dry, and free of dust or grease. Measure the area using the grid on the back of the film, leaving a small overlap for trimming. Peel the backing away slowly while smoothing the vinyl onto the surface using a soft cloth or an application squeegee, working from the center outward to push out air. If bubbles appear, gently lift and re-stick. Clean the finished surface with a mild detergent and a damp cloth; avoid abrasive sponges or harsh chemicals that could scratch the texture.
