This all-weather 4K PoE camera features a 1/1.8-inch 8MP image sensor, a Multi-TOPs AI Engine, and...This all-weather 4K PoE camera features a 1/1.8-inch 8MP image sensor, a Multi-TOPs AI Engine, and long-range IR night vision. It supports resolutions up to 3840 x 2160 (4K) with a field of view of H: 109.9°, V: 56.7°, and D: 134.1°. The camera includes a microphone and has an IP66 weatherproofing rating and IK04 tamper resistance. Mounting options include wall, ceiling, and pole mounts. The UniFi application suite supports Protect. Networking is handled by a 10/100 MbE RJ45 port. Video settings offer color, brightness, sharpness, contrast, white balance, exposure control, 2DNR, 3DNR, NR by motion, masking, text overlay, and HDR. The maximum frame rate is 30 FPS. The optics feature a 1/1.8-inch 8MP sensor with a fixed focal length lens and built-in IR LED illumination with an IR cut filter. The camera's hardware supports a maximum power consumption of 9.9W and a voltage range of 37-57V DC via PoE. It has a Quad-core Arm Cortex -A53 based processor. The pole mount diameter is 1.5-2 inches (38-50 mm). The enclosure is made of polycarbonate and aluminum alloy, with aluminum alloy for the wall mount and polycarbonate for the pole mount. It has one factory-reset button. The operating temperature range is -20 to 50°C (-4 to 122°F) and humidity is 0 to 90% non-condensing. The camera is NDAA Compliant and holds CE, FCC, and IC certifications. Dimensions are 82 x 88.8 mm without mount and 82 x 153 mm with mount. IR night vision extends up to 30 m (98 ft). Features include face recognition, license plate recognition, and smart detections for people, vehicles, and animals.
The Ubiquiti G6 Bullet camera is designed for users needing reliable, high-resolution surveillance both indoors and outdoors. It offers 4K video quality, advanced AI features, and easy setup, providing sharp, detailed footage and smart detection capabilities. However, users should note that this camera requires a PoE (Power over Ethernet) connection and a compatible UniFi Protect system for full functionality.
All features
Brand
Ubiquiti
Extended Product Information
FAQs
What is the resolution of the G6 Bullet camera?
The camera has a maximum resolution of 3840 x 2160 (4K).
Does the camera support Wi-Fi?
No, the camera only supports wired Ethernet connections.
What is the night vision range?
The night vision range is up to 30 meters (98 feet).
Is the camera weatherproof?
Yes, it has an IP66 rating for weatherproofing and IK04 for tamper resistance.
What is the power source for the camera?
The camera uses Power over Ethernet (PoE).
What kind of mounting options are available?
The camera supports ceiling, wall, and pole mounting.
Does the camera have a built-in microphone?
Yes, the camera has a built-in microphone.
Can I use this camera without a UniFi Protect system?
No, this camera requires a UniFi Protect system for full functionality.
Troubleshooting
Camera is not powering on.
Check the PoE connection and ensure the network switch or injector is providing the correct power. Verify the Ethernet cable is connected properly.
Poor video quality.
Clean the lens. Adjust video settings (brightness, contrast, sharpness) in the UniFi Protect application. Ensure the camera is not obstructed.
Camera not being discovered by UniFi Protect.
Ensure the camera and the UniFi Protect device are on the same network. Reset the camera using the factory reset button. Check the network settings.
Night vision not working.
Ensure the camera is in a low-light environment. Check the night vision settings in UniFi Protect. The IR LED may be disabled.
Pros and Cons
Pros
High-resolution 4K video quality
Advanced AI features for smart detections
Durable, weatherproof design for outdoor use
Easy setup with PoE
Seamless integration with UniFi Protect
Long night vision range
Cons
Requires UniFi Protect for full functionality
Dependent on PoE infrastructure
May require a compatible UniFi Network setup
Limited local storage options
Requires a separate UniFi Protect device (e.g., a UNVR or Cloud Key Gen2 Plus)
Setup, Compatibility & Care
Setup:
Mounting: Choose your desired mounting location (wall, ceiling, or pole). Use the appropriate mounting hardware provided.
Network Connection: Connect the camera to your network via the RJ45 Ethernet port. Ensure the network is providing PoE.
UniFi Protect: Adopt the camera in your UniFi Protect application. Follow the on-screen instructions to complete the setup.
Compatibility:
The Ubiquiti G6 Bullet camera is compatible with the UniFi Protect system. It requires a UniFi Network setup for network functionality and is managed through the UniFi Protect application. It operates with a voltage range of 37-57V DC via PoE.
Care:
Regularly clean the lens with a soft, lint-free cloth to maintain image quality.
Ensure the camera is securely mounted to prevent tampering or damage.
Inspect the camera and connections periodically for any signs of wear or damage.