Sanitary Connection Hose Extension - 300 mm

Flexible connection hose for use in bathrooms, for taps, corner and device valves. Length: 300 mm....

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later.

Product Information

Full details

This 300 mm tecuro Sanitary Connection Hose Extension is designed for reliable water connections in bathrooms, suitable for taps, corner valves, and device valves. Its key benefit is its flexible yet durable construction, ensuring a secure and long-lasting connection. A potential consideration is its specific male fitting size, requiring verification for compatibility with existing plumbing.

All features

Model Part Number70080300
Brandtecuro

Extended Product Information

FAQs

What is the exact size of the male fittings?

The hose has 3/8 inch male fittings on both ends.

What is the inner diameter of the hose?

The inner diameter (DN) is 8 mm.

Can this hose be used for hot water?

Yes, it is designed to withstand temperatures from -10°C to 90°C, making it suitable for hot water.

Is this hose suitable for drinking water?

Yes, the materials used (silicone inner tube, stainless steel braiding, brass connections) are manufactured and tested according to KTW-A and W 270 DVGW standards, ensuring suitability for potable water.

How much water pressure can this hose handle?

The hose is pressure resistant up to 10 bar.

What is the weight of this connection hose?

The weight of the hose is approximately 0.13 pounds.

What is the warranty period for this product?

Information regarding warranty period is not provided in the product details.

Troubleshooting

Hose is leaking at connection point.

Ensure the union nut is tightened correctly. Check that the pressed-in seal is present and properly seated. Verify that the 3/8 inch male fitting is screwed in straight and not cross-threaded.

Water flow is restricted.

Check if the hose is kinked or severely bent, which can impede flow. Ensure the connections are not blocked internally. If the issue persists, the valve or tap may be the source of the restriction.

Hose seems stiff or difficult to maneuver.

While durable, extreme cold can reduce flexibility. Allow the hose to warm to room temperature. Avoid forcing the hose into sharp bends that could damage the internal structure.

Pros and Cons

Pros

  • Durable stainless steel braiding and silicone inner tube for longevity.
  • High pressure and wide temperature resistance for reliable operation.
  • Certified materials ensure safe use with potable water.
  • Flexible design simplifies installation in confined areas.
  • Secure, leak-proof connections with brass fittings and seals.

Cons

  • Specific 3/8 inch male fitting may not be universally compatible without adapters.
  • 300 mm length might be too short for some installations.
  • Requires careful handling to avoid kinking the flexible hose.
  • Weight of 0.13 pounds might be a factor in very delicate installations.

Setup, Compatibility & Care

Setup:

  1. Ensure the water supply is turned off at the main valve or the relevant stopcock.
  2. Remove any old or damaged connection hoses.
  3. Screw one end of the tecuro hose onto the tap or appliance outlet, ensuring the 3/8 inch male fitting is the correct type.
  4. Screw the other end onto the water supply valve, ensuring the union nut and its integrated seal are properly seated.
  5. Tighten both connections firmly by hand, then use a wrench for a final quarter-turn to secure, being careful not to overtighten.
  6. Slowly turn the water supply back on and check thoroughly for any leaks at both connection points.

Compatibility:

  • Fittings: Both ends feature a 3/8 inch male fitting. Verify this matches your existing tap, valve, or appliance connections.
  • Inner Diameter: The hose has an inner diameter of 8 mm (DN 8).
  • Water Temperature: Suitable for water temperatures between -10°C and 90°C.
  • Water Pressure: Designed for systems up to 10 bar.

Care:

  • Periodically inspect the hose for any signs of wear, damage, or leaks.
  • Clean the exterior with a damp cloth; avoid abrasive cleaners.
  • Ensure connections remain snug, re-tightening slightly if any drips are noticed, but do not overtighten.