Nissin Commander Air 1 - Sony

The Commander Air 1 for Sony is primarily designed to work with the Nissin Air i700 flash unit and other Nissin flashes equipped with the Nissin Air radio receiver system.

You can control up to twenty-one flashguns simultaneously, organized into three distinct groups.

The Commander Air 1 has a maximum wireless operating range of up to thirty meters (approximately 98 feet).

Yes, you can adjust both the flash power output and the zoom position of compatible flash heads directly from the Commander Air 1.

The Commander Air 1 controls compatible flashes, and if the connected flash and camera support HSS, it can facilitate HSS functionality.

The Nissin Commander Air 1 typically uses AA batteries. Please refer to the product manual for the exact number and type required.

This specific model, the Nissin Commander Air 1 for Sony, is designed for Sony camera systems. Nissin offers separate Commander Air units for Canon and Nikon.

Ensure both the commander and flashes are powered on and within range. Verify that the flashes are in receiver mode and compatible with the Air system. Try re-pairing the units by following the manual's instructions.

Check TTL compensation settings on the Commander Air 1 and on the individual flash units if applicable. Ensure there are no obstructions between the commander and the flashes. Replace batteries in both the commander and flashes if they are low.

Minimize obstructions between the commander and the flashes. Avoid strong radio interference from other wireless devices. Ensure fresh batteries are installed, as low power can reduce range.