Best current price£19.60from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£19.60Visit shop Timco Afhp300g Adjustable Hinge Set With Hook On Plate - Hot Dipped Galvanised 300Mm Plain Bag 1
Visit shop
B&Q£28.33Visit shop B&Q - Adjustable Gate Hinge Set With Hook On Plate Hot Dipped Galvanised300mm
Visit shop6 offers from £19.60 - £31.50
View price history by clicking the chart icon.
The Timco 300mm Adjustable Gate Hinge Set is designed for homeowners and contractors seeking a robust, long-lasting solution for field or driveway gates mounted to timber, concrete, or masonry posts. Its primary benefit is the full adjustability, which ensures perfect gate alignment over time, though users should note that precise drilling is required during installation to ensure the bolt-through fixings are level.
| Colour | Grey |
|---|---|
| Model Part Number | AFHP300G |
| Brand | TIMCO |
This set is specifically designed for timber, concrete, or masonry posts. Mounting to metal would require specialized drilling and potentially different fastening methods.
While the hot-dipped galvanised finish is rated for urban and industrial areas, extreme coastal salt-air environments may still lead to faster oxidation than inland locations.
Yes, the set includes M10 carriage bolts, coach screws, nuts, and washers.
The bottom fitting clamps around the heel of the gate and provides the vertical support and adjustment needed for smooth swinging.
You can mount the bottom pin upside down to prevent the gate from being lifted off the hook, or use the provided hole in the hook-to-bolt for a linch pin.
Adjust the bottom threaded fitting to raise or lower the heel side of the gate until level.
Apply a high-quality exterior-grade grease to the hinge pin to ensure smooth rotation.
Check all nuts and coach screws to ensure they are fully tightened; timber may shrink slightly in summer, requiring a secondary tightening.
For installation, ensure you have a spirit level to align the hook-on plates correctly on the post. When mounting to concrete or masonry, you will require masonry drill bits and appropriate wall plugs or resin anchors. Use the provided M10 carriage bolts for the timber connections, ensuring they are tightened securely to prevent vibration-induced loosening. Regular maintenance includes a quick annual inspection to ensure the adjustable nuts remain tight and applying a small amount of grease to the hinge pins to maintain smooth operation.
