Wessex Electrical Fused Spur Switched - White

This unit must be installed by a qualified electrician in accordance with current electrical safety regulations.

The maximum load is 13 Amperes (13A).

It is suitable for many fixed appliances, but you must check the power (wattage or amperage) of your specific immersion heater. If it exceeds 13A, you will need a higher-rated fused connection unit.

Yes, it is supplied with a 13A fuse, ready for installation.

The switch provides a local means of isolating the power to the connected appliance for maintenance, repair, or emergencies without affecting the main power supply to other circuits.

The fuse should only be checked or replaced if it has blown. Regular inspection is not necessary unless there are signs of fault.

While it can be used for outdoor lighting circuits, the installation must comply with all relevant regulations for outdoor electrical equipment, including appropriate weatherproofing of the enclosure and wiring entry points.

Check that the main power is switched on at the consumer unit. Verify the switch on the fused spur is in the 'on' position. Ensure the fuse is correctly seated and is the correct rating (13A). Confirm wiring connections are secure and correct.

This may indicate an issue with the internal mechanism. Ensure no debris has entered the switch. If the problem persists, the unit may need replacement by a qualified electrician.

This indicates a fault, likely an overload or a short circuit in the connected appliance or wiring. Do not replace the fuse immediately. Have the circuit and appliance inspected by a qualified electrician.