Shopping.co.uk

Sealey LED Strip Lighting - LEDSTR03

Not AvailableSealey LED Strip Lighting - LEDSTR03
Not Available
Not Available

Linkable LED strip lights with PIR and CDS sensor. USB powered. Each strip features six SMD LEDs a...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later.

Product Information

Full details

This guide helps you understand and use the Sealey LED Strip Lighting - LEDSTR03 effectively. Designed for users needing versatile, USB-powered lighting, these strip lights offer convenience with their built-in PIR and CDS sensors. Note that the sensor functionality is limited to low-light conditions.

All features

Model Part NumberLEDSTR03
BrandSealey

Extended Product Information

FAQs

How many strips can I link together?

You can link up to five strips together.

What type of batteries are needed for the battery case?

The battery case requires 4 x AAA batteries (not included).

What is the sensor's range?

The PIR sensor's range is approximately 3 meters.

Can I adjust the brightness of the lights?

No, the brightness is not adjustable.

Are the lights waterproof?

No, the lights are not waterproof and should be kept away from moisture.

What if the adhesive strips don't stick?

Ensure the surface is clean and dry before applying the adhesive. You can also use the included screws for more secure mounting.

What is the sensor mode options?

The sensor can be set to either 30 seconds or 1 minute before turning off.

Where can I use these lights?

You can use the lights in various locations, including under cabinets, closets, stairwells, and desks.

Troubleshooting

Lights do not turn on.

Check the power connection and ensure the USB cable is securely plugged in. If using a battery case, check the battery level and ensure the batteries are correctly installed.

Sensor does not activate the lights.

Ensure the ambient light is low (less than 10-20 LUX). Check that the sensor is not obstructed and the motion detection area is clear.

Lights are flickering.

Check the power source and try a different USB adapter or power bank. Replace the batteries in the battery case if applicable.

Strips are not linking properly.

Ensure the connectors are securely plugged in. Check for any damage to the linking connectors.

Pros and Cons

Pros

  • Easy to install with various mounting options.
  • Sensor-activated for automatic operation.
  • Linkable design allows for flexible coverage.
  • USB powered, offering multiple power source options.
  • Energy-efficient LED technology.
  • Includes corner extensions for versatile placement.

Cons

  • Sensor functionality limited to dark environments.
  • Battery case requires separate purchase of AAA batteries.
  • Sensor modes are limited to 30 seconds and 1 minute.
  • Adhesive strips may not be suitable for all surfaces.

Setup, Compatibility & Care

  1. Installation:
  • Choose your desired location and clean the surface if using adhesive.
  • Attach the metal clips using screws or adhesive strips.
  • Connect the strip lights using the provided corner extensions if needed.
  1. Powering:
  • Connect the USB cable to a 5V 1A/2A power source, like a power bank or USB plug adaptor.
  • Alternatively, use the battery case with 4 x AAA batteries (not included).
  1. Compatibility:
  • Compatible with any 5V 1A/2A USB power source.
  1. Care:
  • Clean with a soft, dry cloth. Do not use harsh chemicals.
  • Ensure the sensor is not blocked for optimal performance.