Best current price£34.91from Rapid Online - Rapid Electronics Ltd.
Shopping.co.uk recommended and popular offers
Rapid Online - Rapid Electronics Ltd.£34.91Visit shop NoiseBlocker ITR-B14-PS-BL NB-eLoop Black Edition PC fan 140x140x2...
Visit shop1 offer from £34.91
View price history by clicking the chart icon.
The NoiseBlocker NB-eLoop B14-PS-BL is designed for PC enthusiasts seeking effective and quiet cooling solutions. Its key benefit is the innovative bionic loop rotor which significantly reduces turbulence and noise while enhancing airflow efficiency. A potential consideration is its specific application for PC cases, workstations, and servers, rather than direct CPU cooling without adaptation.
| Colour | Black |
|---|---|
| Model Part Number | ITR-B14-PS-BL |
| Brand | NoiseBlocker |
The bionic loop rotor design significantly reduces air turbulence and noise, leading to quieter operation and improved airflow efficiency compared to traditional fan designs.
While it provides excellent airflow, it is primarily designed for PC case cooling. For direct CPU cooling, specialized CPU coolers with compatible fan mounting are typically required.
The fan features a Mean Time Between Failures (MTBF) of 140,000 hours, indicating a very long operational lifespan under normal conditions, thanks to its high-quality bearings and construction.
Yes, the fan includes 4 screws for mounting.
Yes, the fan supports Pulse-Width Modulation (PWM), allowing for precise speed control through compatible motherboard headers or fan controllers.
The fan's rotational speed ranges from 300 RPM (minimum) to 1200 RPM (maximum). The noise level at minimum speed is significantly lower than the maximum 24.28 dB, contributing to very quiet operation during low-load periods.
The fan incorporates an anti-dust Makrolon rotor and a dust-protected motor and bearing system to minimize dust buildup, which helps maintain performance and extends the lifespan of the fan.
Verify the 4-pin connector is fully seated on the motherboard or fan controller. Check that the fan header is receiving power and is enabled in the BIOS/UEFI. Ensure the starting voltage requirement of 5V is met.
Confirm the fan is securely mounted and not vibrating against the case. Check for any obstructions in the fan's path. If noise persists, the fan may be defective; contact support.
Ensure the 4-pin connector is used, not a 3-pin. Check motherboard BIOS/UEFI settings to confirm PWM control is enabled for the fan header. Update motherboard chipset drivers if necessary.
Carefully clean the fan blades and frame with a soft brush or compressed air. The anti-dust rotor technology helps, but periodic cleaning is still recommended.
Setup:
Compatibility:
Care:
